Le matériel de formation de l'examen de meilleur Microsoft 70-649

Le programme de formation Microsoft 70-649 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Microsoft 70-649 via son guide d'étude. Est-ce que vous vous souciez de test Certification Microsoft 70-649? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Microsoft 70-649.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft 70-649 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Code d'Examen: 70-649
Nom d'Examen: Microsoft (TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist)
Questions et réponses: 250 Q&As

70-649 Démo gratuit à télécharger: http://www.pass4test.fr/70-649.html

NO.1 Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. You
deploy a new virtual machine (VM) named VM1 on Server1.You need to ensure that VM1 is available if
one of the Hyper-V servers fails. What should you do?
A. Install the Network Load Balancing (NLB) feature on VM1.
B. Install the Network Load Balancing (NLB) feature on Server1.
C. Install the Failover Clustering feature on VM1. From Failover Cluster Manager on VM1, click Configure
a Service or Application.
D. From Failover Cluster Manager on Server1, click Configure a Service or Application.
Answer: D

Microsoft   70-649   certification 70-649

NO.2 Your network contains a server that has the Remote Desktop Session Host (RD Session Host) role
service installed. You need to increase the bandwidth that is allocated for printing and for file transfers
between the RD Session Host server and the Remote Desktop clients. What should you do?
A. On the server, modify the RDP-Tcp settings.
B. On the server, modify the Flow Control Channel Band width registry setting.
C. On the clients, modify the Flow Control Display Band width registry setting.
D. On the clients, modify the Local Resources settings of the Remote Desktop connections.
Answer: B

Microsoft examen   certification 70-649   certification 70-649   70-649   certification 70-649   70-649 examen

NO.3 Your network contains a Web server that runs Windows Server 2008 R2. Remote management is
configured for Internet Information Services (IIS). From IIS Manager Permissions, you add a user to a
Web site. You need to prevent the user from using Internet Information Services (IIS) Manager to modify
the authorization rules of the Web site. Which settings should you configure?
A. Authorization Rules
B. Feature Delegation
C. IIS Manager Permissions
D. IIS Manager Users
Answer: B

certification Microsoft   70-649   70-649

NO.4 You have a test lab that contains 20 client computers and a server named Server1. The client
computers run Windows 7. Server1 runs Windows Server 2008 Service Pack 2 (SP2). You install the Key
Management Service (KMS) on Server1. You need to ensure that the client computers can successfully
activate by using Server1. What should you do?
A. Upgrade Server 1 to Windows Server 2008 R2.
B. Deploy five additional client computers that run Windows 7.
C. On each client computer, run slmgr.vbs /rearm.
D. On Server1, restart the Windows Activation Technologies service.
Answer: B

Microsoft examen   certification 70-649   70-649 examen   70-649 examen   70-649

NO.5 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a
connection authorization policy named TS_CAP_01. You need to ensure that only client computers that
have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway.
What should you do?
A. From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource
authorization policy.
B. From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection
authorization policy.
C. From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D. From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.
Answer: C

Microsoft   70-649   certification 70-649   70-649   70-649

NO.6 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
following Remote Desktop Services (RDS) role services installed: Remote Desktop Session Host (RD
Session Host) Remote Desktop Web Access (RD Web Access) You publish 10 Remote App programs on
Server1 by using RD Web Access. You need to ensure that when users log on to the RD Web Access
page, they see only the Remote App programs assigned to them.
What should you modify from Remote App Manager?
A. the properties of each Remote App program
B. the RD Gateway Settings
C. the RDP Settings
D. the RD Session Host Server Settings
Answer: A

certification Microsoft   70-649   70-649 examen

NO.7 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Hyper-V server role installed. Server1 hosts a virtual machine (VM) named VM1. You take a snapshot of
VM1 at 05:00 and at 19:00. You use Hyper-V Manager to delete the snapshot taken at 05:00. You need to
ensure that the files created by the 05:00 snapshot are deleted from the hard disk on Server1. What
should you do?
A. At the command prompt, run the rmdir.exe command.
B. From Windows Power Shell, run the Remove-Item cmdlet.
C. From the Hyper-V Manager console, shut down VM1.
D. From the Hyper-V Manager console, right-click VM1 and click Revert.
Answer: C

certification Microsoft   70-649 examen   70-649   70-649   70-649

NO.8 Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to create
an image of Server1 to deploy to additional servers. You need to identify how many more times you can
rearm the Windows activation clock. What should you run on Server1?
A. msinfo32.exe
B. slmgr.vbs /dlv
C. slui.exe
D. winrm.vbs enumerate
Answer: B

Microsoft   certification 70-649   70-649   70-649

NO.9 Your network contains a server named Server1. Server1 has the Remote Desktop Session Host (RD
Session Host) role service installed. You need to ensure that when a user disconnects a Remote Desktop
connection, the connection is forcibly terminated after 30 minutes. Which RDP-Tcp settings should you
configure?
A. Client Settings
B. Environment
C. Log on Settings
D. Sessions
Answer: D

certification Microsoft   70-649   70-649   70-649

NO.10 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 has Remote Desktop Services Per Device client access licenses (RDS Per Device CALs)
installed. Server2 and Server3 are members of a Remote Desktop Connection Broker (RD Connection
Broker) farm. Four months after Server2 and Server3 are deployed, you discover that users can no longer
establish Remote Desktop sessions on Server3. You verify that Server3 is online and that all required
services on Server3 run properly. You verify that the users can establish Remote Desktop sessions on
Server2. You need to ensure that the users connecting to the RD Connection Broker farm can establish
sessions on Server3. What should you do?
A. On Server3, enable dedicated farm redirection.
B. On Server3, configure the Remote Desktop licensing settings.
C. On Server1, install additional RDS Per Device CALs.
D. On Server1, run the Manage RDS CALs wizard and click the Migrate action.
Answer: B

Microsoft   certification 70-649   70-649 examen   70-649

NO.11 Your network contains a server named Server1 that has the Hyper-V server role installed. Server1 hosts
a virtual machine (VM) named VM1. You add an additional hard disk to Server1. The hard disk is
configured as a basic disk. You need to configure VM1 to use the new hard disk as a pass-through disk.
What should you do before you configure the pass-through disk?
A. Create a simple volume.
B. Take the new hard disk offline.
C. Convert the new hard disk to a GPT disk.
D. Convert the new hard disk to a dynamic disk.
Answer: B

Microsoft   70-649 examen   70-649   70-649

NO.12 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Windows Deployment Services (WDS) server role and the Windows Automated Installation Kit (Windows
AIK)installed. You create a new x86 Microsoft Windows Preinstallation Environment (Windows PE) image
and add it as a boot image to Server1. You run the Create Capture Image wizard and receive the following
error message: "The Windows Deployment Services Image Capture Wizard could not be located in the
specified Windows PE image." You need to ensure that you can create a capture image by using the
Create Capture Image wizard. What should you do first?
A. Create an x64 Windows PE image and add the image to Server1 as a boot image.
B. Add a new boot image to Server1 and specify the Sources\Boot.wim file from the Windows Server
2008 R2 installation media.
C. Mount the Windows PE boot image and add the contents of the% program Files%\Windows
AIK\Tools\amd64 folder to the image.
D. Mount the Windows PE boot image and add the contents of the %program Files%\Windows
AIK\Tools\PE Tools folder to the image.
Answer: B

Microsoft   70-649   70-649 examen   certification 70-649

NO.13 Your network contains a server named Server1 that has two volumes named C and D. You add a new
volume. You need to ensure that you can access data on the new volume by using the path D:\data. What
should you do?
A. From Disk Management, create a volume mount point.
B. From Disk Management, attach a virtual hard disk (VHD).
C. At the command prompt, run the diskraid.exe command and specify the /v parameter.
D. At the command prompt, run the dism.exe command and specify the /mount-wim parameter.
Answer: A

certification Microsoft   certification 70-649   70-649

NO.14 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Session Host (RD Session Host) role service installed. You need to ensure that Remote
Desktop users can use the user interface elements of Windows Aero. What should you do on Server1?
A. Change the display settings.
B. Add the Desktop Experience feature.
C. Install a DirectX 10 compliant video adapter.
D. Add the Quality Windows Audio Video Experience feature.
Answer: B

certification Microsoft   certification 70-649   70-649   certification 70-649   certification 70-649

NO.15 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2008 R2. Routers on the network support multicast transmissions. A server named Server1 has the
Windows Deployment Services (WDS) server role installed. A custom Windows 7 image is available for
download from Server1. You need to deploy the image to 100 new computers by using multicast. The
solution must prevent computers that use low-bandwidth connections from slowing the deployment to
computers that use high-bandwidth connections. What should you do.?
A. Enable Auto-Cast.
B. Enable Scheduled-Cast.
C. From the WDS server properties, adjust the Transfer Settings.
D. From the WDS server properties, modify the Multicast IP Address settings.
Answer: C

Microsoft examen   certification 70-649   70-649   certification 70-649

NO.16 You manage a member server that runs Windows Server 2008 R2. The server has the Web Server (IIS)
server role installed. The Web server hosts a Web site named Intranet1. Only internal Active Directory
user accounts have access to the Web site. The authentication settings for Intranet1 are configured as
shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users authenticate to the Web site by using only the Microsoft Challenge
Handshake Authentication Protocol version 2 (MS-CHAPv2) encrypted Active Directory credentials.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the Digest Authentication role service and the URL Authorization role service to the server.
B. Add the Windows Authentication roleserviceto IIS.Configure the Windows Authentication setting to
Enabled in the Intranet1 properties.
C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.
D. Configure the Default domain field for the Basic Authentication settings on Intranet1 by adding the
name of the Active Directory domain.
E. Configure the Basic Authentication setting to Disabled and the Anonymous Authentication setting to
Enabled in the Intranet1 properties.
Answer: BC

Microsoft examen   70-649 examen   70-649

NO.17 Your network contains two standalone servers named Server1 and Server2. Server1 has Microsoft
SQL Server 2008 Reporting Services installed. Server2 has the SMTP Server feature installed. You
configure the Reporting Services on Server1 to send reports by using Server2. You need to ensure that
Server2 sends the reports. What should you do on Server2?
A. Configure a smart host.
B. Configure TLS encryption.
C. Modify the Relay restrictions settings.
D. Modify the Connection control settings.
Answer: C

Microsoft   70-649 examen   70-649   70-649 examen

NO.18 Your network contains two servers.
The servers are configured as shown in the following table.
You need to limit the display quality of Remote Desktop connections. What should you do?
A. Create a Remote Desktop resource allocation policy (RD RAP) on Server2.
B. Create a Windows System Resource Manager (WSRM) resource allocation policy on Server1.
C. Edit the properties of the RDP-Tcp connection on Server1.
D. Edit the properties of the Remote Desktop connection authorization policy (RD CAP) on Server2.
Answer: C

Microsoft   70-649   70-649

NO.19 Your network contains an Active Directory domain. The domain contains two servers named Server1
and Server2. You connect Server1 and Server2 to a logical unit number (LUN) on a Storage Area Network
(SAN). You need to ensure that you can use the LUN in a failover cluster. What should you do?
A. From Server Manager, run the Best Practices Analyzer.
B. From File Server Resource Manager, generate a storage report.
C. From Failover Cluster Manager, run the Validate a Configuration Wizard.
D. From Share and Storage Management, verify the advanced settings of the LUN.
Answer: C

certification Microsoft   70-649 examen   certification 70-649   70-649

NO.20 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 and Server2 are members of an RD Session Host server farm named farm1.contoso.com. You
configure the RD Connection Broker role service on Server3 to support farm1.contoso.com. You need to
create DNS records to support RD Connection Broker load balancing. Which record or records should
you create for farm1.contoso.com?
A. one Alias (CNAME) record
B. one Host (AAAA) record
C. two Host (A) records
D. two service location (SRV) records
Answer: C

Microsoft   70-649 examen   70-649 examen   70-649 examen   70-649

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Microsoft 70-649. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 70-649, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Dernières Microsoft MB7-515 de la pratique de l'examen questions et réponses téléchargement gratuit

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Microsoft MB7-515 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Microsoft MB7-515 réel est lancée. C'est possible à réussir 100% avec le produit de Microsoft MB7-515. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Code d'Examen: MB7-515
Nom d'Examen: Microsoft (NAV 5.0 Financials)
Questions et réponses: 210 Q&As

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft MB7-515, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft MB7-515. Peut-être d'obtenir le Certificat Microsoft MB7-515 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Microsoft MB7-515 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Microsoft MB7-515.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Microsoft MB7-515. Votre argent sera tout rendu si vous échouez le test.

C'est sûr que le Certificat Microsoft MB7-515 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Microsoft MB7-515, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Microsoft MB7-515 peut bien tester la professionnalité de IT.

MB7-515 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-515.html

NO.1 What is the minimum acceptable level of security that requires that each user is assigned an ID and a
password?
A. Record level security
B. Company level security
C. Table level security
D. Database level security
Answer: D

Microsoft examen   certification MB7-515   certification MB7-515

NO.2 Which of the following statements is TRUE about dimensions?
A. All dimensions are stored directly on the G/L entries.
B. Only global dimensions are stored directly on the G/L entries.
C. Only budget dimensions are stored directly on the G/L entries.
D. Only shortcut dimensions are stored directly on the G/L entries.
Answer: B

certification Microsoft   certification MB7-515   MB7-515   MB7-515 examen

NO.3 What is the result of blocking a Dimension Code?
A. Prevents further posting using the Dimension code
B. Prevents viewing of data with the Dimension code
C. Prevents further posting to the Dimension code and restricts viewing of data containing that Dimension
code
D. Removes Dimension code data from the program
Answer: A

Microsoft   MB7-515   certification MB7-515   MB7-515

NO.4 If you want to post a recurring journal entry on the last day of every month, how can you fill in the
Recurring Frequency field in the recurring journal?
A. 1M+1D
B. 1M
C. 1M+CM
D. CM+1D
Answer: C

Microsoft   certification MB7-515   certification MB7-515   MB7-515 examen   MB7-515   MB7-515 examen

NO.5 For LCY Conversion Rounding to take place, the following accounts need to be set up in the Currency
Card:
A. Realized Losses Account, Unrealized Losses Account
B. Conv. LCY Rounding Debit Account, Max. VAT Difference Allowed
C. Conv. LCY Rounding Debit Account, Conv. LCY Rounding Credit Account
D. Conv. LCY Rounding Credit Account, Max. VAT Difference Allowed
Answer: C

Microsoft   MB7-515   certification MB7-515   MB7-515 examen   certification MB7-515   MB7-515 examen

NO.6 What field must equal zero before you can post a General Journal?
A. Balance
B. Balance Account No.
C. Total Balance
D. Amount
Answer: C

certification Microsoft   MB7-515 examen   MB7-515   MB7-515   MB7-515 examen

NO.7 Your client wants all posted customer entries to contain the SALES Department Code. You can
achieve this by using which of the following?
A. Dimension Combinations
B. Analysis Views
C. Account Type Default Dimensions
D. Default Dimension Priorities
Answer: C

Microsoft examen   MB7-515   MB7-515

NO.8 General Business Posting Groups are: Choose the 2 that apply.
A. Set up in the Financial Management area
B. Assigned to Vendor Cards
C. Assigned to Item Cards
D. Assigned to Resource Cards
Answer: AB

Microsoft examen   MB7-515 examen   MB7-515 examen

NO.9 The primary balance sheet G/L Account associated with the Customer Posting Group is:
A. Accounts Receivable
B. Revenue
C. Accounts Payable
D. Vendors
Answer: A

Microsoft   MB7-515 examen   MB7-515 examen   MB7-515 examen   MB7-515

NO.10 You are about to implement a new Microsoft Dynamics NAV installation by using the RIM Toolkit. The
customer is a small furniture manufacturing company with two years in business. The company has not
used an ERP system before, and legacy data is available in Microsoft Excel format. Which of the following
overall RIM processes do you follow to achieve the fastest implementation?
A. Have the customer complete a "Furniture" setup questionnaire, create a new generic company,
prepare data templates, and migrate legacy data by means of Excel files.
B. Create a new company based on the "Furniture" company type, prepare data templates, migrate
legacy data by means of Excel files, and enter setup data.
C. Have the customer complete a "Furniture" setup questionnaire, create a new company based on the
"Furniture" company type, import and apply questionnaire
Answers, prepare data templates, and migrate legacy data by means of XML.
D. Have the customer complete a "Furniture" setup questionnaire, create a new company based on the
"Furniture"
company type, import and apply questionnaire
Answers, prepare data templates, and migrate legacy data by means of
Excel.
Answer: D

Microsoft   MB7-515 examen   certification MB7-515

NO.11 What technique does Microsoft Dynamics NAV use to allow multiple users access to the database at
the same time?
A. Database-version principle
B. Database redundancy
C. Read concurrency
D. Read consistency
Answer: A

Microsoft examen   MB7-515 examen   MB7-515   MB7-515 examen   MB7-515

NO.12 Choosing the "Limited" option in Dimension Combination Setup allows which of the following?
A. The Dimension combination is always allowed on entries.
B. The Dimension combination is allowed in only certain circumstances.
C. The Dimension combination is allowed in only certain circumstances, and the values are defined.
D. The Dimension combination is allowed on every entry.
Answer: C

Microsoft   certification MB7-515   MB7-515   certification MB7-515   MB7-515

NO.13 Dimension Priorities for Sales Journal entries are set as "2" for the Item table and "1" for the Customer
table. What is the effect?
A. If the Dimension code has a value from the Customer Table and the Item Table, then the Customer
table takes priority.
B. If the Dimension code has a value from the Item Table and the Customer Table, then the Item Table
takes priority.
C. The program will resolve the conflict in favor of the last entered account.
D. The Item Table always takes precedence.
Answer: A

Microsoft   MB7-515   MB7-515   MB7-515

NO.14 Which dimension feature needs to be set up to prevent the posting of the "LARGE" Business Group
dimension value with the "HOME" Customer Group dimension value?
A. Default dimension priorities
B. Global Dimensions
C. Value Posting Rules
D. Dimension Combinations and Dimension Value Combinations
Answer: D

certification Microsoft   MB7-515   MB7-515   MB7-515 examen

NO.15 If you choose the "Variable" Recurring Method on a Recurring Journal, which one of the following
describes how Microsoft Dynamics NAV will process the journal?
A. The Amount field on the journal will be changed to zero after posting.
B. The balance of the account you select will be automatically entered in the Amount field and will be
changed to zero after posting.
C. The Amount field on the journal will be changed to zero after posting, and a reversing entry will be
posted the following day.
D. The Amount field will remain the same after posting.
Answer: A

Microsoft   MB7-515   MB7-515 examen

NO.16 How are menus assigned to users?
A. While in the standard window, right-click the menu button of the menu that you want to assign, and
then click Assign Users.
B. While in the Navigation Pane Designer, right-click the menu button of the menu that you want to assign,
and then click Properties.
C. While in the standard window, right-click the menu button of the menu that you want to assign, and
then click Assign.
D. While in the Navigation Pane Designer, right-click the menu button of the menu that you want to assign,
and then click Assign Users.
Answer: D

Microsoft   MB7-515 examen   MB7-515   MB7-515

NO.17 Which RIM Toolkit elements help to structure new data? Choose the 2 that apply.
A. Setup questionnaire
B. Industry-specific setup data
C. Data templates
D. Data migration files
Answer: BC

Microsoft examen   certification MB7-515   MB7-515 examen

NO.18 What is the effect of using the Insert Conv. LCY Rndg. Lines function in journals?
A. The function replaces all currency amounts in the journal with LCY amounts.
B. The function posts rounding differences to a currency residual account.
C. The function inserts a foreign currency journal line that ensures that the journal is balanced both in
foreign currency and LCY.
D. The function inserts an LCY journal line that ensures that the journal is balanced both in foreign
currency and LCY.
Answer: D

Microsoft   certification MB7-515   MB7-515   certification MB7-515   MB7-515

NO.19 When you have selected the Recurring Method of Reversing Fixed on a recurring journal line, the
program will post a reversing entry on what date?
A. The Posting Date + one month
B. The same date as the Posting Date on the journal line
C. The date after the Posting Date on the journal line
D. The Posting Date + the date formula in the Recurring Frequency field
Answer: C

Microsoft   certification MB7-515   certification MB7-515   MB7-515

NO.20 Your client wants the program to automatically assign a set of dimensions to every transaction posted
for a specific customer. This is achieved by setting up:
A. Dimension Combinations
B. Default Dimensions
C. Dimension Value Combinations
D. Shortcut Dimensions
Answer: B

certification Microsoft   MB7-515   MB7-515 examen

Bien qu'il ne soit pas facile à réussir le test Microsoft MB7-515, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Microsoft MB7-515, mais encore à vous aider d'économiser votre temps.

Dernières Microsoft MB2-634 de la pratique de l'examen questions et réponses téléchargement gratuit

C'est sûr que le Certificat Microsoft MB2-634 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Microsoft MB2-634, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Microsoft MB2-634 peut bien tester la professionnalité de IT.

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Microsoft MB2-634 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Microsoft MB2-634 est le rêve pour les professionnels ambitieux.

Vous pouvez tout d'abord télécharger le démo Microsoft MB2-634 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft MB2-634, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft MB2-634. Peut-être d'obtenir le Certificat Microsoft MB2-634 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft MB2-634 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Code d'Examen: MB2-634
Nom d'Examen: Microsoft (CRM 4.0 Extending Microsft Dynamics)
Questions et réponses: 82 Q&As

Pass4Test peut offrir la facilité aux candidats qui préparent le test Microsoft MB2-634. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Microsoft MB2-634 selon le résumé de test réel Microsoft MB2-634. Vous pouvez réussir le test à la première fois sans aucune doute.

La population de la Certification Microsoft MB2-634 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

MB2-634 Démo gratuit à télécharger: http://www.pass4test.fr/MB2-634.html

NO.1 As an administrator of your company network, you've assigned a task that you have to design an
extension to Microsoft Dynamics CRM for a customer. If a sales person activates a quote and the total
discount exceeds a threshold, then the extension should create tasks for various people. The logic for
calculating this threshold is complex, and is dependent on data in several entities, including the user, the
account and the product entities. The customer wants the flexibility to change the content and properties
of the tasks that are created by the code. So what extension approach is most appropriate?
A.Write a plug-in that checks whether the total discount exceeds the threshold, and if so creates the tasks.
B.Use client-side JScript to check whether the discount exceeds the threshold. If it does, use further
client-side JScript to create the tasks.
C.Create a custom workflow activity that returns a value identifying whether the total discount exceeds the
threshold.
D.Use client-side JScript to check whether the discount exceeds the threshold. If it does, set a flag
attribute in the quote record.
Answer:C

certification Microsoft   certification MB2-634   MB2-634 examen   MB2-634 examen   certification MB2-634

NO.2 Look at the following extensibility features. Please choose the appropriate one which meets the
following two requirements: 1. It is available within the the Microsoft Dynamics CRM for Microsoft Office
Outlook with Offline Access. 2. It can be deployed as part of the synchronization process. (choose more
than one)
A.Plug-ins
B.ASP.NET extensions
C.Custom workflow activities
D.Client script that accesses the crmForm object model
Answer:A D

Microsoft examen   MB2-634   MB2-634   MB2-634   certification MB2-634

NO.3 You're an administrator of your company network. Now you've been assigned a task. You have to write
an application that automatically disables a set of accounts. Which option should you use to
programmatically disable an account using the Microsoft Dynamics CRM Web service? (choose more
than one)
A.CrmService.Update method.
B.CrmService.SetState method.
C.Pass a SetStateAccountRequest to CrmService.Execute method.
D.Pass a SetStateDynamicEntityRequest to CrmService.Execute method.
Answer:C D

Microsoft examen   MB2-634 examen   MB2-634   certification MB2-634   MB2-634

NO.4 As an administrator of your company network. You've been assigned a task, you have to write an
application which uses the CrmService Web service to find an account based on its name attribute. So
what method should you use?
A.Retrieve method of the account class.
B.Retrieve method of the CrmService class.
C.RetrieveMultiple method of the account class.
D.RetrieveMultiple method of the CrmService class.
Answer:D

Microsoft examen   MB2-634   certification MB2-634   MB2-634

NO.5 As an administrator of a network, you have to build some custom validation code which will force
Microsoft Dynamics CRM users to enter values in certain fields of an opportunity once its CloseProbability
field exceeds 50%. A message must be displayed when a user fails to enter appropriate data and they are
prevented from saving the opportunity. So what should you do to ensure this? (choose more than one)
A.You should use lient-side JScript
B.You should use a plug-in on a pre-event
C.You should use a plug-in on a post-event
D.You should use a custom workflow activity
Answer:A B

Microsoft examen   MB2-634 examen   MB2-634 examen

NO.6 You're an administrator of your company network. When using the CrmService Web service, which
method should you use to create a new lead in the Microsoft Dynamics CRM database?
A.Constructor of the lead class.
B.Create method of the lead class.
C.Constructor of the CrmService class.
D.Create method of the CrmService class.
Answer:D

Microsoft   MB2-634   MB2-634   MB2-634 examen

NO.7 You're in charge of your company network. There's a rule in your company which provides that when a
user creates or updates an account in Microsoft Dynamics CRM, corresponding data in a custom
application is to be added or updated with no latency. The custom application has a .NET API that can be
used to add or update data. You have to ensure that only data that is saved to Microsoft Dynamics CRM is
written to the custom application. So what extension approach is most appropriate?
A.In a custom workflow activity.
B.Client-side JScript in the OnSave event.
C.In a plug-in that is registered on the pre-event.
D.In a plug-in that is registered on the post-event.
Answer:D

Microsoft examen   certification MB2-634   MB2-634   MB2-634 examen   certification MB2-634

NO.8 You are an adiministrator of your company network. You created and deployed a web application which
accesses Microsoft Dynamics CRM contact data through the CrmService Web service. The application
uses a Web reference for the CrmService Web service which was created within Visual Studio and uses
strongly typed MicrosoftDynamics CRM Classes. Subsequently two new attributes have been added to
the contact entity. And you want to use these new attributes in your application. In order to make these
new attributes available to your application, what should you do?
A.You don't need to do anything else.
B.You should publish the contact entity within the Microsoft Dynamics CRM user interface.
C.Within the Visual Studio .Net project, update the Web reference to the CrmService Web service.
D.In Visual Studio .Net, find the proxy code generated for the Web service. Add the new attributes as
properties of the contact class.
Answer:C

Microsoft   MB2-634   certification MB2-634   MB2-634

NO.9 You're an administrator of your company network. Now you're creating custom Web pages that extend
Microsoft Dynamics CRM contact functionality, using the Microsoft Dynamics CRM Web service. You
want any changes made to the Microsoft Dynamics CRM entity and attribute display names can be
reflected by your Web pages. So what should you do to achieve this with as little additional development
work as possible?
A.Read the display names from the Microsoft Dynamics CRM Web service CrmService.
B.Read the display names from the Microsoft Dynamics CRM Web service MetadataService.
C.Store all text in a satellite .Net assembly. Create a separate copy of the satellite assembly for each
deployment with the relevant text.
D.Use .Net Reflection within your Web pages to determine the entity and attribute display names at
runtime from the WSDL generated by the Microsoft Dynamics
Answer:B

Microsoft   MB2-634 examen   certification MB2-634   certification MB2-634

NO.10 You're an administrator of your company network. you want to use the CrmService Web service to find
all opportunities that have a CloseProbability greater than 50%. So what should you do to achieve this?
A.Use the Retrieve method of the CrmService Web service.
B.Use the RetrieveMultiple method of the CrmService Web service, and pass a QueryExpression
parameter.
C.Use the RetrieveMultiple method of the CrmService Web service, and pass a QueryByAttribute
parameter.
D.Use the RetrieveMultiple method of the CrmService Web service, and pass a SQLCommand parameter
that queries the FilteredOpportunity view.
Answer:B

Microsoft   MB2-634 examen   MB2-634   certification MB2-634

Dans cette Industrie IT intense, le succès de test Microsoft MB2-634 peut augmenter le salaire. Les gens d'obtenir le Certificat Microsoft MB2-634 peuvent gagner beaucoup plus que les gens sans Certificat Microsoft MB2-634. Le problème est comment on peut réussir le test plus facile?

Certification Microsoft de téléchargement gratuit pratique d'examen 70-401, questions et réponses

Peut-être vous voyez les guides d'études similaires pour le test Microsoft 70-401, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Microsoft 70-401 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Microsoft 70-401 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

On peut voir que beaucoup de candidats ratent le test Microsoft 70-401 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Microsoft 70-401 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Microsoft 70-401, Pass4Test peut offrir les Q&As des autres test Certification IT.

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Microsoft 70-401. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.

Code d'Examen: 70-401
Nom d'Examen: Microsoft (MS System Center Configuration Manager2007, Configuring)
Questions et réponses: 130 Q&As

Vous avez aussi la possibilité à réussir le test Microsoft 70-401. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

70-401 Démo gratuit à télécharger: http://www.pass4test.fr/70-401.html

NO.1 you have a System Center Configuration Manager 2007 environment. You install a secondary site at a
branch office.
You discover that communication is not occurring between the secondary site and its parent site.
You need to ensure two-way communication between the secondary site and its parent site.
What should you do?
A. On the parent site, create a standard sender address to the secondary site.
B. On the parent site, create an asynchronous RAS sender to the secondary site.
C. On the secondary site, create an asynchronous RAS sender to the parent site.
D. On the secondary site, publish the Configuration Manager site information to Active Directory.
Answer: A

Microsoft examen   70-401   certification 70-401   70-401

NO.2 You install System Center Configuration Manager 2007 in your Active Directory environment.
You need to ensure that client agent installation automatically retrieves client deployment parameters
from Active Directory Domain Services.
You extend the Active Directory schema. You create the System Management container. Which two
actions should you perform? next(Each correct answer presents part of the solution. Choose two.)
A. Import the contents of the ConfigMgr_ad_schema.ldf file into Active Directory Domain Services.
B. Set security permissions on the System Management container.
C. Add the server account for the first installed site server to the Schema Admins global security group.
D. Enable Active Directory publishing for the Configuration Manager site.
Answer: BD

Microsoft   70-401   70-401 examen   70-401 examen

NO.3 You have a System Center Configuration Manager 2007 environment. You have a primary site named
P01 in the main office. The Active Directory site named Site001 is assigned to P01 boundaries.
You establish a new branch office that has an Active Directory site named Site002.
You install a child site named S01 in the branch office. S01 is configured with a distribution point and a
management point.
You need to assign client computers in the branch office to site S01.
What should you do?
A. Create a site boundary for S01 that contains all IP subnets for the branch office.
B. Create a protected site system boundary on P01 that contains all IP subnets for the main office.
C. Create a protected site system boundary on P01 that contains all IP subnets for the branch office.
D. Modify Site001 to include subnets for the branch office.
Answer: A

Microsoft   70-401 examen   70-401   70-401 examen

NO.4 You are planning an upgrade of your Systems Management Server (SMS) 2003 central site to System
Center Configuration Manager 2007. SQL Server replication is enabled on the SMS 2003 site database.
You need to test the upgrade of the SMS 2003 site database to Configuration Manager 2007.
You create a parallel test environment. Which two actions should you perform? in the test environment?
(Each correct answer presents part of the solution. Choose two.)
A. Delete any existing local SQL Server replication subscriptions, and configure the SMS 2003 site
database to publish for replication.
B. Delete any existing local SQL Server replication subscriptions, and disable replication on the SMS
2003 site database.
C. Run Configuration Manager 2007 Setup on the SMS 2003 site database with the /testdbupgrade
switch.
D. Run Configuration Manager 2007 Setup on the SMS 2003 site database with the /prereq switch.
Answer: BC

Microsoft   70-401   70-401   70-401

NO.5 You have a System Center Configuration Manager 2007 environment. You create a new child site
named S01 at a new branch office. You deploy the management point and the software update point.
Computers in the S01 site are able to detect Microsoft security updates, but the computers are not able to
install the updates successfully.
You need to configure the S01 site so that client computers can install security updates.
What should you do?
A. Configure the software update point to synchronize from an upstream update server.
B. Configure a distribution point for S01. Send the update packages to the distribution point.
C. Configure the system health validator point. Enable the Advertised Programs client agent.
D. Enable software update point client installation. Configure the Network Access account for S01.
Answer: B

Microsoft   70-401   certification 70-401   70-401

NO.6 You have a System Center Configuration Manager 2007 environment.
Currently, you collect software inventory data on a monthly basis.
You need to ensure that all software inventory reports include data about software that was installed as
recently as the past seven days.
What should you do?
A. Configure the software update point synchronization schedule to run every seven days.
B. Create a custom Configuration Manager Web report to display all software inventory changes that
occurred within the past seven days.
C. Configure the Software Updates client agent to run every seven days.
D. Configure the Software Inventory client agent to run every seven days.
Answer: D

Microsoft   70-401   70-401

NO.7 You have a Systems Management Server (SMS) 2003 environment. Your central site is in the United
States, and you have a primary child site in Germany. The central site is running Microsoft Windows
Server 2003 software for the English language. The primary child site is running Windows Server 2003
software for the German language.
You are upgrading your environment to System Center Configuration Manager 2007.
You need to enable the SMS Provider role for the primary child site.
What should you do.?
A. Install the SMS Provider on the central site on the German version of Windows Server 2003.
B. Install the SMS Provider on the central site on the English version of Windows Server 2003.
C. Install the SMS Provider on the primary child site on the German version of Windows Server 2003.
D. Install the SMS Provider on the primary child site on the English version of Windows Server 2003.
Answer: C

Microsoft examen   70-401   70-401   70-401

NO.8 You have a System Center Configuration Manager 2007 environment. You have a secondary site at a
branch office. The branch office is connected to the main office by a 512-Kbps (kilobits per second) WAN
link.
You need to eliminate all package distribution traffic on the WAN from the primary site between 3:00
P.M.and 5:00 P.M.
Which two tasks should you do on the sender address(Each correct answer presents part of the
solution.Choose two.)
A. Configure rate limits for the primary site.
B. Configure pulse mode for the primary site.
C. Configure pulse mode for the secondary site.
D. Configure a schedule for the primary site.
Answer: AD

Microsoft   70-401   70-401   70-401

NO.9 You have a System Center Configuration Manager 2007 environment. You install a secondary site at a
branch office, and you configure the local IP subnet as the site boundary. The branch office site is
connected to the primary site by a 192-Kbps (kilobits per second) WAN link. You need to minimize
bandwidth utilization for all client agent policies from the branch office.
What should you do?
A. Install a proxy management point at the secondary site.
B. Install a branch distribution point at the secondary site.
C. Configure all software package advertisements to Download content from distribution point and run
locally.
D. Configure all software package advertisements to Run program from distribution point.
Answer: A

Microsoft   70-401 examen   70-401   certification 70-401

NO.10 You have a System Center Configuration Manager 2007 environment. The site named S01 is located on
the intranet. S01 uses a server in the perimeter network to provide a management point to Internet-based
client computers.
You need to configure the server roles in the perimeter network to communicate to the S01 site. Which
two actions should you perform?(Each correct answer presents part of the solution. Choose two.)
A. Configure the Network Access account on S01.
B. Configure S01 to use the site server s computer account to install site systems.
C. Configure the S01 site system property to allow only site server initiated data transfers from the site
system.
D. Configure a Site System Installation account on S01.
Answer: CD

Microsoft   70-401   70-401   certification 70-401   70-401 examen

NO.11 You have a System Center Configuration Manager 2007 environment. Local client computers receive
software updates from Configuration Manager.
You need to ensure that remote client computers that connect to the virtual private network (VPN) are
able to receive software updates.
What should you do?
A. Create a new site system, and configure it with the Software Update Point role.
B. Create a new site system, and configure it with the SMS Provider role.
C. Add the IP subnets that the VPN uses to the network discovery.
D. Create a new site boundary, and add the IP subnets that the VPN uses to the site boundary.
Answer: D

Microsoft examen   70-401   70-401   70-401   70-401

NO.12 You have a System Center Configuration Manager 2007 environment. You have a central site named
C01 and a primary child site named S01.
You notice that computers in the Active Directory site named Site001 are assigned to C01 and S01.
You need to ensure that computers in Site001 are assigned to S01.
What should you do?
A. Remove the Active Directory Site Boundary Site001 from S01.
B. Remove the Active Directory Site Boundary Site001 from C01.
C. Enable client push installation on S01 by using a command-line argument of SMSSITECODE=S01.
D. Enable client push installation on S01 by using a command-line argument of SMSSITECODE=AUTO.
E. Configure the Site001 boundary on C01 as a Slow or unreliable network, and configure the Site001
boundary on S01 as a Fast (LAN) network.
Answer: B

Microsoft   70-401   70-401   70-401

NO.13 You have a System Center Configuration Manager 2007 environment.
You install the Configuration Manager client agent on all Microsoft Windows 2000 Professional and
Microsoft Windows XP Professional computers in the environment.
You need to ensure that you can remotely control user sessions on all computers.
What should you do?
A. Configure Remote Desktop settings by using a Group Policy object (GPO).
B. Configure Remote Desktop settings in the Remote Tools client agent.
C. Configure Remote Tools settings in the Remote Tools client agent.
D. Configure Remote Assistance in the Remote Tools client agent.
Answer: C

Microsoft examen   70-401 examen   70-401 examen

NO.14 Your System Center Configuration Manager 2007 environment has a single site server. You attempt to
perform a client push installation to Microsoft Windows computers. On some of the computers, the
installation fails and generates an Access denied error message.
You need to ensure that the client push installation is performed successfully.
What should you do?
A. On the site server, grant the Client Push Installation account local administrator permissions.
B. On the affected Windows computers, grant the Client Push Installation account local administrator
permissions.
C. On the affected Windows computers, grant the Client Push Installation account the Access this
computer from the network right.
D. On the affected Windows computers, add the Client Push Installation account to the Power Users
group.
Answer: B

Microsoft examen   70-401   70-401   certification 70-401   certification 70-401

NO.15 You have a System Center Configuration Manager 2007 environment. You publish an accounting
application to a distribution point.
You need to restrict access to the files on the distribution point.
What should you do?
A. Create a Client Push Installation account, and refresh the distribution point.
B. Create a Software Update Point Connection account, and refresh the distribution point.
C. Create a Package Access account, and refresh the distribution point.
D. Create a Software Update Point Proxy Server account, and refresh the distribution point.
Answer: C

Microsoft   certification 70-401   70-401

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

Microsoft meilleur examen 70-433, questions et réponses

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Microsoft 70-433 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Microsoft 70-433 est le rêve pour les professionnels ambitieux.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 70-433 très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 70-433, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Microsoft 70-433 peut vous assurer à réussir 100% le test Microsoft 70-433. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Microsoft 70-433 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Code d'Examen: 70-433
Nom d'Examen: Microsoft (TS: Microsoft SQL Server 2008, Database Development)
Questions et réponses: 145 Q&As

70-433 Démo gratuit à télécharger: http://www.pass4test.fr/70-433.html

NO.1 You need to create a stored procedure that accepts a table-valued parameter named @Customers.
Which code segment should you use?
A. CREATE PROCEDURE AddCustomers
(@Customers varchar(max))
B. CREATE PROCEDURE AddCustomers
(@Customers Customer READONLY)
C. CREATE PROCEDURE AddCustomers
(@Customers CustomerType OUTPUT)
D. CREATE PROCEDURE ADDCUSTOMERS
(@Customers varchar (max))
AS
EXTERNAL NAME Customer.Add.NewCustomer
Answer: B

certification Microsoft   70-433   70-433 examen   70-433

NO.2 You currently store date information in two columns. One column contains the date in local time and
one column contains the difference between local time and UTC time. You need to store this data in a
single column.
Which data type should you use?
A. time
B. datetime2
C. datetime2(5)
D. datetimeoffset
Answer: D

Microsoft examen   70-433   70-433   70-433

NO.3 You are responsible for a SQL Server database. You require the tables to be added or altered only on
the first day of the month. You need to ensure that if the tables are attempted to be modified or created on
any other day, an error is received and the attempt is not successful.
Which Transact-SQL statement should you use?
A. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON DATABASE FOR CREATE_TABLE
AS
IF DATEPART(day,getdate())>1
BEGIN
RAISERROR ('Must wait til next month.', 16, 1)
END
B. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON DATABASE FOR CREATE_TABLE,ALTER_TABLE
AS
IF DATEPART(day,getdate())>1
BEGIN
RAISERROR ('Must wait til next month.', 16, 1)
END
C. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON DATABASE FOR CREATE_TABLE,ALTER_TABLE
AS
IF DATEPART(day,getdate())>1
BEGIN
ROLLBACK
RAISERROR ('Must wait til next month.', 16, 1)
END
D. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON ALL SERVER FOR ALTER_DATABASE
AS
IF DATEPART(day,getdate())>1
BEGIN
ROLLBACK
RAISERROR ('Must wait til next month.', 16, 1)
END
Answer: C

Microsoft   70-433 examen   70-433

NO.4 You have created an assembly that utilizes unmanaged code to access external resources.
You need to deploy the assembly with the appropriate permissions.
Which permission set should you use?
A. SAFE
B. UNSAFE
C. EXTERNAL_ACCESS
D. Default permission set
Answer: B

Microsoft   70-433   70-433   certification 70-433

NO.5 You have a single CLR assembly in your database. The assembly only references blessed
assemblies from the Microsoft .NET Framework and does not access external resources.
You need to deploy this assembly by using the minimum required permissions. You must ensure that your
database remains as secure as possible.
Which options should you set?
A. PERMISSION_SET = SAFE
TRUSTWORTHY ON
B. PERMISSION_SET = SAFE
TRUSTWORTHY OFF
C. PERMISSION_SET = UNSAFE
TRUSTWORTHY ON
D. PERMISSION_SET = EXTERNAL_ACCESS
TRUSTWORTHY OFF
Answer: B

Microsoft examen   70-433   70-433

NO.6 You have a computed column that is implemented with a user-defined function. The user-defined
function returns a formatted account number. The column must be indexed to provide adequate search
performance.
You plan to create an index on the computed column. You need to identify the valid combination of
ObjectPropertyEX values for the user-defined function.
Which combination should you use?
A. IsDeterministic = True
IsSystemVerified = True
UserDataAccess = False
SystemDataAccess = False
B. IsDeterministic = True
IsSystemVerified = True
IsPrecise = True
IsTableFunction = True
C. IsDeterministic = False
IsSystemVerified = True
UserDataAccess = False
SystemDataAccess = False
D. IsDeterministic = False
IsSystemVerified = True
IsPrecise = True
SystemDataAccess = False
Answer: A

Microsoft   70-433 examen   70-433   70-433 examen   70-433

NO.7 You have a user named John. He has SELECT access to the Sales schema. You need to eliminate
John's SELECT access rights from the Sales.SalesOrder table without affecting his other permissions.
Which Transact-SQL statement should you use?
A. DROP USER John;
B. DENY SELECT ON Sales.SalesOrder TO John;
C. GRANT DELETE ON Sales.SalesOrder TO John;
D. REVOKE SELECT ON Sales.SalesOrder FROM John;
Answer: B

Microsoft   70-433 examen   70-433

NO.8 You are developing a new database. The database contains two tables named SalesOrderDetail and
Product.
You need to ensure that all products referenced in the SalesOrderDetail table have a corresponding
record in the Product table.
Which method should you use?
A. JOIN
B. DDL trigger
C. Foreign key constraint
D. Primary key constraint
Answer: C

Microsoft   70-433   certification 70-433   certification 70-433   70-433

NO.9 You are creating a function that references a table.
You need to prevent the table from being dropped.
Which option should you use when you create the function?
A. WITH ENCRYPTION
B. WITH EXECUTE AS
C. WITH SCHEMABINDING
D. WITH RETURNS NULL ON NULL INPUT
Answer: C

Microsoft   70-433 examen   certification 70-433

NO.10 You are creating a table that stores the GPS location of customers.
You need to ensure that the table allows you to identify customers within a specified sales boundary and
to calculate the distance between a customer and the nearest store.
Which data type should you use?
A. geometry
B. geography
C. nvarchar(max)
D. varbinary(max) FILESTREAM
Answer: B

Microsoft   70-433   70-433   70-433 examen   70-433 examen

NO.11 You have a SQL Server 2008 database named Contoso with a table named Invoice. The primary key of
the table is InvoiceId, and it is populated by using the identity property. The Invoice table is related to the
InvoiceLineItem table. You remove all constraints from the Invoice table during a data load to increase
load speed. You notice that while the constraints were removed, a row with InvoiceId = 10 was removed
from the database. You need to re-insert the row into the Invoice table with the same InvoiceId value.
Which Transact-SQL statement should you use?
A. INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
B. SET IDENTITY_INSERT Invoice ON;
INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
SET IDENTITY_INSERT Invoice OFF;
C. ALTER TABLE Invoice;
ALTER COLUMN InvoiceId int;
INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
D. ALTER DATABASE Contoso SET SINGLE_USER;
INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
ALTER DATABASE Contoso SET MULTI_USER;
Answer: B

certification Microsoft   70-433 examen   70-433 examen   certification 70-433   70-433

NO.12 You need to alter stored procedures to use the WITH RECOMPILE option. Which types of stored
procedures should you alter? (Each correct answer represents a complete solution. Choose two.)
A. Stored procedures implemented from CLR assemblies.
B. Stored procedures that require the FOR REPLICATION option.
C. Stored procedures that require the WITH ENCRYPTION option.
D. Stored procedures that contain queries that use the OPTION (RECOMPILE) hint.
Answer: CD

Microsoft examen   certification 70-433   70-433   70-433   70-433

NO.13 You plan to add a new column named SmallKey to the Sales.Product table that will be used in a
unique constraint. You are required to ensure that the following information is applied when adding the
new column:
'a1' and 'A1' are treated as different values
'a' and 'A' sort before 'b' and 'B' in an ORDER BY clause
You need to select the collation that meets the requirements for the new column. Which collation should
you select?
A. Latin1_General_BIN
B. SQL_Latin1_General_CP1_CI_AI
C. SQL_Latin1_General_CP1_CI_AS
D. SQL_Latin1_General_CP1_CS_AS
Answer: D

Microsoft   70-433   70-433

NO.14 You need to create a column that allows you to create a unique constraint.
Which two column definitions should you choose? (Each correct answer presents a complete solution.
Choose two.)
A. nvarchar(100) NULL
B. nvarchar(max) NOT NULL
C. nvarchar(100) NOT NULL
D. nvarchar(100) SPARSE NULL
Answer: AC

Microsoft   70-433   70-433 examen

NO.15 Your database contains two tables named Order and OrderDetails that store order information. They
relate to each other using the OrderID column in each table. Your business requires that the
LastModifiedDate column in the Order table must reflect the date and time when a change is made in the
OrderDetails table for the related order.
You need to create a trigger to implement this business requirement.
Which Transact-SQL statement should you use?
A. CREATE TRIGGER [uModDate] ON [OrderDetails]
INSTEAD OF UPDATE FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
B. CREATE TRIGGER [uModDate] ON [Order]
INSTEAD OF UPDATE NOT FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
C. CREATE TRIGGER [uModDate] ON [Order]
AFTER UPDATE FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
D. CREATE TRIGGER [uModDate] ON [OrderDetails]
AFTER UPDATE NOT FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
Answer: D

Microsoft   70-433   70-433   certification 70-433

NO.16 Your database is 5GB and contains a table named SalesHistory. Sales information is frequently
inserted and updated.
You discover that excessive page splitting is occurring.
You need to reduce the occurrence of page splitting in the SalesHistory table.
Which code segment should you use?.
A. ALTER DATABASE Sales
MODIFY FILE
(NAME = Salesdat3,
SIZE = 10GB);
B. ALTER INDEX ALL ON Sales.SalesHistory
REBUILD WITH (FILLFACTOR = 60);
C. EXEC sys.sp_configure 'fill factor (%)', '60';
D. UPDATE STATISTICS Sales.SalesHistory(Products)
WITH FULLSCAN, NORECOMPUTE;
Answer: B

Microsoft   70-433 examen   70-433 examen   certification 70-433   70-433   70-433

NO.17 You need to identify, within a given clause, if the month of February will contain 29 days for a specified
year.
Which object should you use?
A. DML trigger
B. Stored procedure
C. Table-valued function
D. Scalar-valued function
Answer: D

Microsoft   70-433 examen   70-433 examen

NO.18 You have a SQL Server database. The database contains two schemas named Marketing and Sales.
The Marketing schema is owned by a user named MarketingManager. The Sales schema is owned by a
user named SalesManager.
A user named John must be able to access the Sales.Orders table by using a stored procedure named
Marketing.GetSalesSummary. John is not granted a SELECT permission on the Sales.Orders table. A
user named SalesUser does have SELECT permission on the Sales.Orders table. You need to implement
appropriate permissions for John and the stored procedure Marketing.GetSalesSummary.
What should you do?
A. Marketing.GetSalesSummary should be created by using the EXECUTE AS 'SalesUser' clause.
John should be granted EXECUTE permission on Marketing.GetSalesSummary.
B. Marketing.GetSalesSummary should be created by using the EXECUTE AS OWNER clause.
John should be granted EXECUTE WITH GRANT OPTION on Marketing.GetSalesSummary.
C. Marketing.GetSalesSummary should be created by using the EXECUTE AS CALLER clause.
John should be granted IMPERSONATE permission for the user named SalesUser.
D. Marketing.GetSalesSummary should be created without an EXECUTE AS clause.
John should be granted SELECT permission on the Sales.Orders table.
Answer: A

Microsoft examen   70-433   70-433 examen   certification 70-433

NO.19 You need to ensure that tables are not dropped from your database.
What should you do?
A. Create a DDL trigger that contains COMMIT.
B. Create a DML trigger that contains COMMIT.
C. Create a DDL trigger that contains ROLLBACK.
D. Create a DML trigger that contains ROLLBACK.
Answer: C

Microsoft   certification 70-433   70-433   70-433   70-433

NO.20 You have a third-party application that inserts data directly into a table.
You add two new columns to the table. These columns cannot accept NULL values and cannot use
default constraints.
You need to ensure that the new columns do not break the third-party application.
What should you do?
A. Create a DDL trigger.
B. Create a stored procedure.
C. Create an AFTER INSERT trigger.
D. Create an INSTEAD OF INSERT trigger.
Answer: D

certification Microsoft   70-433   70-433   70-433

NO.21 You have a table named AccountsReceivable. The table has no indexes. There are 75,000 rows in the
table. You have a partition function named FG_AccountData. The AccountsReceivable table is defined in
the following Transact-SQL statement:
CREATE TABLE AccountsReceivable (
column_a INT NOT NULL,
column_b VARCHAR(20) NULL)
ON [PRIMARY];
You need to move the AccountsReceivable table from the PRIMARY file group to FG_AccountData.
Which Transact-SQL statement should you use?
A. CREATE CLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON [FG_AccountData];
B. CREATE NONCLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON [FG_AccountData];
C. CREATE CLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON FG_AccountData(column_a);
D. CREATE NONCLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON FG_AccountData(column_a);
Answer: C

certification Microsoft   70-433   70-433   70-433 examen

NO.22 You have two partitioned tables named Transaction and TransactionHistory.
You need to archive one of the partitions of the Transaction table to the TransactionHistory table.
Which method should you use?
A. ALTER TABLE ...
SWITCH ...
B. INSERT ... SELECT ...;
TRUNCATE TABLE
C. ALTER PARTITION FUNCTION ...
MERGE ...
D. ALTER PARTITION FUNCTION ...
SPLIT ...
Answer: A

certification Microsoft   70-433   70-433

NO.23 Click the Exhibit button.
You are developing a database using Microsoft SQL Server 2008. The database contains the tables
shown in the exhibit.
You are required to prevent parts from being deleted if they belong to a kit. If a part belongs to a kit, the
delete should not occur and the IsDeleted column for the row should be changed to 'True'. Parts can be
deleted if they do not belong to a kit.
You have the following Transact-SQL statement to be used in a trigger:
UPDATE p
SET IsDeleted = 1
FROM KitPart kp
JOIN deleted d ON kp.PartID = d.PartID
JOIN Part p ON kp.PartID = p.PartID;
DELETE FROM p
FROM Part p
JOIN deleted d ON p.PartID = d.PartID
LEFT OUTER JOIN KitPart kp ON p.PartID = kp.PartID
WHERE kp.KitID IS NULL;
You need to implement the Transact-SQL statement in a trigger. Which trigger syntax should you use?
A. CREATE TRIGGER tr_Part_d ON Part
AFTER DELETE AS
BEGIN
END
B. CREATE TRIGGER tr_Part_d ON Part
INSTEAD OF DELETE AS
BEGIN
END
C. CREATE TRIGGER tr_KitPart_d ON KitPart
AFTER DELETE AS
BEGIN
END
D. CREATE TRIGGER tr_KitPart_d ON KitPart
INSTEAD OF DELETE AS
BEGIN
END
Answer: B

certification Microsoft   certification 70-433   certification 70-433   certification 70-433

NO.24 You have multiple tables that represent properties of the same kind of entities. The property values
are comprised of text, geometry, varchar(max), and user-defined types specified as 'bit NOT NULL' data
types.
You plan to consolidate the data from multiple tables into a single table. The table will use semi-structured
storage by taking advantage of the SPARSE option.
You are tasked to identify the data types that are compatible with the SPARSE option.
Which data type is compatible with the SPARSE option?
A. text
B. geometry
C. varchar(max)
D. A user-defined type defined as 'bit NOT NULL'
Answer: C

certification Microsoft   certification 70-433   70-433   certification 70-433   70-433

NO.25 You manage a SQL Server 2008 database that is located at your company's corporate headquarters.
The database contains a table named dbo.Sales. You need to create different views of the dbo.Sales
table that will be used by each region to insert, update, and delete rows. Each regional office must only be
able to insert, update, and delete rows for their respective region.
Which view should you create for Region1?
A. CREATE VIEW dbo.Region1Sales
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1;
B. CREATE VIEW dbo.Region1Sales
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1
WITH CHECK OPTION;
C. CREATE VIEW dbo.Region1Sales
WITH SCHEMABINDING
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1;
D. CREATE VIEW dbo.Region1Sales
WITH VIEW_METADATA
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1;
Answer: B

certification Microsoft   70-433   70-433 examen

NO.26 You have tables named Products and OrderDetails. The Products table has a foreign key relationship
with the OrderDetails table on the ProductID column. You have the following Transact-SQL batch:
BEGIN TRY
BEGIN TRANSACTION
DELETE FROM Products WHERE ProductID = 5;
BEGIN TRANSACTION
INSERT INTO OrderDetails
( OrderID, ProductID, Quantity )
VALUES
( 1234, 5, 12 );
COMMIT TRANSACTION
COMMIT TRANSACTION
END TRY
BEGIN CATCH
ROLLBACK TRANSACTION
PRINT ERROR_MESSAGE();
END CATCH
You need to analyze the result of executing this batch. What should be the expected outcome?
A. 1. The product will be deleted from the Products table.
2. The order details will be inserted into the OrderDetails table.
B. 1. The product will be deleted from the Products table.
2. The order details will not be inserted into the OrderDetails table.
C. 1. The product will not be deleted from the Products table.
2. The order details will be inserted into the OrderDetails table.
D. 1. The product will not be deleted from the Products table.
2. The order details will not be inserted into the OrderDetails table.
Answer: D

Microsoft   70-433   70-433   certification 70-433   70-433   70-433 examen

NO.27 You administer a SQL Server 2008 database that contains a table name dbo.Sales, which contains the
following table definition:
CREATE TABLE [dbo].[Sales](
[SalesID] [int] IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED,
[OrderDate] [datetime] NOT NULL,
[CustomerID] [int] NOT NULL,
[SalesPersonID] [int] NULL,
[CommentDate] [date] NULL);
This table contains millions of orders. You run the following query to determine when sales persons
comment in the dbo.Sales table:
SELECT SalesID,CustomerID,SalesPersonID,CommentDate
FROM dbo.Sales
WHERE CommentDate IS NOT NULL
AND SalesPersonID IS NOT NULL;
You discover that this query runs slow. After examining the data, you find only 1% of rows have comment
dates and the SalesPersonID is null on 10% of the rows. You need to create an index to optimize the
query. The index must conserve disk space while optimizing your query.
Which index should you create?
A. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CustomerID)
INCLUDE (CommentDate,SalesPersonID);
B. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (SalesPersonID)
INCLUDE (CommentDate,CustomerID);
C. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CustomerID)
INCLUDE(CommentDate)
WHERE SalesPersonID IS NOT NULL;
D. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CommentDate, SalesPersonID)
INCLUDE(CustomerID)
WHERE CommentDate IS NOT NULL;
Answer: D

Microsoft   70-433 examen   70-433   70-433 examen

NO.28 You have a table named dbo.Customers. The table was created by using the following Transact-SQL
statement:
CREATE TABLE dbo.Customers
(
CustomerID int IDENTITY(1,1) PRIMARY KEY CLUSTERED,
AccountNumber nvarchar(25) NOT NULL,
FirstName nvarchar(50) NOT NULL,
LastName nvarchar(50) NOT NULL,
AddressLine1 nvarchar(255) NOT NULL,
AddressLine2 nvarchar(255) NOT NULL,
City nvarchar(50) NOT NULL,
StateProvince nvarchar(50) NOT NULL,
Country nvarchar(50) NOT NULL,
PostalCode nvarchar(50) NOT NULL,
CreateDate datetime NOT NULL DEFAULT(GETDATE()),
ModifiedDate datetime NOT NULL DEFAULT(GETDATE())
)
You create a stored procedure that includes the AccountNumber, Country, and StateProvince columns
from the dbo.Customers table. The stored procedure accepts a parameter to filter the output on the
AccountNumber column.
You need to optimize the performance of the stored procedure. You must not change the existing
structure of the table.
Which Transact-SQL statement should you use?
A. CREATE STATISTICS ST_Customer_AccountNumber
ON dbo.Customer (AccountNumber)
WITH FULLSCAN;
B. CREATE CLUSTERED INDEX IX_Customer_AccountNumber
ON dbo.Customer (AccountNumber);
C. CREATE NONCLUSTERED INDEX IX_Customer_AccountNumber
ON dbo.Customer (AccountNumber)
WHERE AccountNumber = '';
D. CREATE NONCLUSTERED INDEX IX_Customer_AccountNumber
ON dbo.Customer (AccountNumber)
INCLUDE (Country, StateProvince);
Answer: D

Microsoft   certification 70-433   70-433 examen   certification 70-433   70-433

NO.29 You have a table named Customer.
You need to ensure that customer data in the table meets the following requirements:
credit limit must be zero unless customer identification has been verified.
credit limit must be less than 10,000.
Which constraint should you use?
A. CHECK (CreditLimt BETWEEN 1 AND 10000)
B. CHECK (Verified = 1 AND CreditLimt BETWEEN 1 AND 10000)
C. CHECK ((CreditLimt = 0 AND Verified = 0) OR (CreditLimt BETWEEN 1 AND 10000 AND Verified = 1))
D. CHECK ((CreditLimt = 0 AND Verified = 0) AND (CreditLimt BETWEEN 1 AND 10000 AND Verified =
1))
Answer: C

Microsoft   70-433   70-433 examen

NO.30 You are creating a new table in a database. Your business requires you to store data in the table for
only seven days.
You need to implement a partitioned table to meet this business requirement.
Which tasks should you complete?
A. Create the partition function
Create the partition scheme
Create the table
B. Create the partition function
Create the table
Create a filtered index
C. Add a secondary file to the primary filegroups
Create the table
Create the distributed partitioned view
D. Create the partition function
Create the partition scheme
Create the distributed partitioned view
Answer: A

Microsoft   70-433   70-433   70-433

Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-433 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-433.