Le test Microsoft 70-562-Csharp est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Microsoft 70-562-Csharp est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Microsoft 70-562-Csharp sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Microsoft 70-562-Csharp avec l'aide de Pass4Test.
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Microsoft 70-562-Csharp. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Microsoft 70-562-Csharp sans aucune doute.
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
Le test Certificat Microsoft 70-562-Csharp est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Microsoft 70-562-Csharp. Vous allez prendre toutes essences du test Microsoft 70-562-Csharp dans une courte terme.
Code d'Examen: 70-562-Csharp
Nom d'Examen: Microsoft (TS:MS.NET Framework 3.5, ASP.NET Application Development)
Questions et réponses: 98 Q&As
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Microsoft 70-562-Csharp.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
70-562-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/70-562-Csharp.html
NO.1 </asp:DetailsView>
You need to ensure that the users can insert and update content in the DetailsView1 control. You also
need to prevent duplication of the link button controls for the Edit and New operations.
Which code segment should you insert at line 03?
A. AllowPaging="false"
AutoGenerateRows="false"
B. AllowPaging="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
C. AllowPaging="true"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
D. AllowPaging="false"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
Answer: B
certification Microsoft certification 70-562-Csharp certification 70-562-Csharp 70-562-Csharp 70-562-Csharp
10. You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web form and add the following code fragment.
<asp:Repeater ID="rptData" runat="server"
DataSourceID="SqlDataSource1"
ItemDataBound="rptData_ItemDataBound">
<ItemTemplate>
<asp:Label ID="lblQuantity" runat="server"
Text='<%# Eval("QuantityOnHand") %>' />
</ItemTemplate>
</asp:Repeater>
The SqlDataSource1 DataSource control retrieves the Quantity column values from a table named
Products.
You write the following code segment to create the rptData_ItemDataBound event handler. (Line numbers
are included for reference only.)
01 protected void rptData_ItemDataBound(object sender,
02 ?RepeaterItemEventArgs e)
03 {
04
05 if(lbl != null)
06 if(int.Parse(lbl.Text) < 10)
07 lbl.ForeColor = Color.Red;
08 }
You need to retrieve a reference to the lblQuantity Label control into a variable named lbl.
Which code segment should you insert at line 04?
A. Label lbl = Page.FindControl("lblQuantity") as Label;
B. Label lbl = e.Item.FindControl("lblQuantity") as
Label;
C. Label lbl = rptData.FindControl("lblQuantity") as
Label;
D. Label lbl = e.Item.Parent.FindControl("lblQuantity") as
Label;
Answer: B
Microsoft 70-562-Csharp 70-562-Csharp examen 70-562-Csharp
NO.2 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server"
11 Text='<%# Eval("LineTotal") %>' />
12 </td>
13 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr
(object sender, ListViewItemEventArgs e)
{
Label LineTotal = (Label)
e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7)
{ LineTotal.ForeColor = Color.Red; }
else
{LineTotal.ForeColor = Color.Black; }
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr
(object sender, ListViewItemEventArgs e)
{
Label LineTotal = (Label)
e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7)
{LineTotal.ForeColor = Color.Red; }
else
{LineTotal.ForeColor = Color.Black; }
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e)
{
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7)
{LineTotal.ForeColor = Color.Red; }
else
{ LineTotal.ForeColor = Color.Black; }
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e)
{
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7)
{LineTotal.ForeColor = Color.Red; }
else
{LineTotal.ForeColor = Color.Black; }
}
Answer: A
Microsoft examen 70-562-Csharp 70-562-Csharp examen certification 70-562-Csharp
NO.3 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The computer that hosts the ASP.NET Web application contains a local instance of Microsoft SQL Server
2005. The instance uses Windows Authentication. You plan to configure the membership providers and
the role management providers.
You need to install the database elements for both the providers on the local computer.
What should you do?
A. Run the sqlcmd.exe -S localhost E command from the command line.
B. Run the aspnet_regiis.exe -s localhost command from the command line.
C. Run the sqlmetal.exe /server:localhost command from the command line.
D. Run the aspnet_regsql.exe -E -S localhost -A mr command from the command line.
Answer: D
certification Microsoft 70-562-Csharp 70-562-Csharp examen 70-562-Csharp examen
NO.4 ShowEditButton="True" ShowInsertButton="True" />
NO.5 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
You deploy the application on a Microsoft IIS 6.0 Web server. The server runs on a worker process
isolation mode, and it hosts the .NET Framework version 1.1 Web applications.
When you attempt to browse the application, the following error message is received:
"It is not possible to run different versions of ASP.NET in the same IIS process. Please use the IIS
Administration Tool to reconfigure your server to run the application in a separate process."
You need to ensure that the following requirements are met:
All the applications run on the server.
All the applications remain in process isolation mode.
All the applications do not change their configurations.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a new application pool and add the new application to the pool.
B. Configure the IIS 6.0 to run the WWW service in the IIS 5.0 isolation mode.
C. Configure the new application to use the .NET Framework version 2.0 in the IIS 6.0 Manager.
D. Set autoConfig="false" on the <processModel> property in the machine.config file.
E. Disable the Recycle worker processes option in the Application Pool Properties dialog box.
Answer: A AND C
Microsoft 70-562-Csharp examen certification 70-562-Csharp certification 70-562-Csharp
NO.6 SortExpression="Title" />
NO.7 You have a Microsoft ASP.NET Framework version 1.0 application. The application does not use any
features that are deprecated in the Microsoft .NET Framework version 3.5. The application runs on
Microsoft IIS 6.0.
You need to configure the application to use the ASP.NET Framework version 3.5 without recompiling the
application.
What should you do?
A. Edit the ASP.NET runtime version in IIS 6.0.
B. Edit the System.Web section handler version number in the machine.config file.
C. Add the requiredRuntime configuration element to the Web.config file and set the version attribute to
v3.5.
D. Add the supportedRuntime configuration element in the Web.config file and set the version attribute to
v3.5.
Answer: A
Microsoft certification 70-562-Csharp certification 70-562-Csharp 70-562-Csharp certification 70-562-Csharp 70-562-Csharp
NO.8 <asp:BoundField DataField="Theater" HeaderText="Theater"
NO.9 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The application uses ASP.NET AJAX, and you plan to deploy it in a Web farm environment.
You need to configure SessionState for the application.
Which code fragment should you use?
A. <sessionState mode="InProc"
cookieless="UseCookies"
/>
B. <sessionState mode="InProc"
cookieless="UseDeviceProfile"
/>
C. <sessionState mode="SQLServer"
cookieless="false"
sqlConnectionString="Integrated Security=SSPI;data
source=MySqlServer;"
/>
D. <sessionState mode="SQLServer"
cookieless="UseUri"
sqlConnectionString="Integrated Security=SSPI;data
source=MySqlServer;"
/>
Answer: C
certification Microsoft 70-562-Csharp examen 70-562-Csharp examen 70-562-Csharp 70-562-Csharp
NO.10 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
You use Windows Authentication for the application. You set up NTFS file system permissions for the
Sales group to access a particular file. You discover that all the users are able to access the file.
You need to ensure that only the Sales group users can access the file.
What additional step should you perform?
A. Remove the rights from the ASP.NET user to the file.
B. Remove the rights from the application pool identity to the file.
C. Add the <identity impersonate="true"/> section to the Web.config file.
D. Add the <authentication mode="[None]"> section to the Web.config file.
Answer: C
Microsoft examen 70-562-Csharp examen 70-562-Csharp 70-562-Csharp certification 70-562-Csharp 70-562-Csharp examen
NO.11 SortExpression="Theater" />
NO.12 <asp:CommandField ShowDeleteButton="false"
NO.13 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application has a Web form file named MovieReviews.aspx.
The MovieReviews.aspx file connects to a LinqDataSource DataSource named LinqDataSource1 that
has a primary key named MovieID.
The application has a DetailsView control named DetailsView1.
The MovieReviews.aspx file contains the following code fragment. (Line numbers are included for
reference only.)
01 <asp:DetailsView ID="DetailsView1" runat="server"
02 DataSourceID="LinqDataSource1"
03
04 />
05 <Fields>
06 <asp:BoundField DataField="MovieID" HeaderText="MovieID"
07 InsertVisible="False"
08 ReadOnly="True" SortExpression="MovieID" />
09 <asp:BoundField DataField="Title" HeaderText="Title"
NO.14 </Fields>
NO.15 You are maintaining a Microsoft ASP.NET Web Application that was created by using the Microsoft .NET
Framework version 3.5.
You obtain the latest version of the project from the source control repository. You discover that an
assembly reference is missing when you attempt to compile the project on your computer.
You need to compile the project on your computer.
What should you do?
A. Add a reference path in the property pages of the project to the location of the missing assembly.
B. Add a working directory in the property pages of the project to the location of the missing assembly.
C. Change the output path in the property pages of the project to the location of the missing assembly.
D. Delete the assembly reference. Add a reference to the missing assembly by browsing for it on your
computer.
Answer: A
Microsoft 70-562-Csharp 70-562-Csharp examen 70-562-Csharp
NO.16 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
You plan to set up authentication for the Web application. The application must support users from
untrusted domains.
You need to ensure that anonymous users cannot access the application.
Which code fragment should you add to the Web.config file?
A. <system.web>
<authentication mode="Forms">
<forms loginUrl="login.aspx" />
</authentication>
<authorization>
<deny users="?" />
</authorization>
</system.web>
B. <system.web>
<authentication mode="Forms">
<forms loginUrl="login.aspx" />
</authentication>
<authorization>
<deny users="*" />
</authorization>
</system.web>
C. <system.web>
<authentication mode="Windows">
</authentication>
<authorization>
<deny users="?" />
</authorization>
</system.web>
D. <system.web>
<authentication mode="Windows">
</authentication>
<authorization>
<deny users="*" />
</authorization>
</system.web>
Answer: A
Microsoft 70-562-Csharp 70-562-Csharp 70-562-Csharp examen
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
没有评论:
发表评论