Les produits de Pass4Test sont préparés pour le test Certification Cisco 642-883, y compris les formations et les informations ciblées au test Cisco 642-883. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Cisco 642-883 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Cisco 642-883 qui vous amenera le succès du test Cisco 642-883, au lieu de traivailler avec peine et sans résultat.
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Cisco 642-883, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
Vous pouvez télécharger tout d'abord une partie de Q&A Certification Cisco 642-883 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Cisco 642-883. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Code d'Examen: 642-883
Nom d'Examen: Cisco (Deploying Cisco Service Provider Network Routing (SPROUTE) )
Questions et réponses: 82 Q&As
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Cisco 642-883. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Cisco 642-883, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Cisco 642-883 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Cisco 642-883 sans aucune doute.
642-883 Démo gratuit à télécharger: http://www.pass4test.fr/642-883.html
NO.1 When configuring IPv4 and IPv6 IS-IS routing on Cisco IOS XR routers, which three statements are
correct? (Choose three.)
A. By default, a single SPF is used for both IPv4 and IPv6, so the IPv4 and IPv6 topology should be the
same.
B. By default, the IS-IS router type is Level 1 and Level 2.
C. All IS-IS routers within the same IS-IS area must be configured with the same IS-IS routing process
instance ID.
D. By default, metric-style narrow is used.
E. By default, the IS-IS interface circuit type is Level 1 and Level 2.
F. The area IS-IS address-family configuration command is used to specify the IS-IS area address.
Answer: B,D,E
certification Cisco certification 642-883 642-883 certification 642-883 642-883
NO.2 Which three statements are true regarding the OSPF router ID? (Choose three.)
A. The OSPF routing process chooses a router ID for itself when it starts up.
B. The router-id command is the preferred procedure to set the router ID.
C. If a loopback interface is configured, its address will always be preferred as the router ID over any
other methods.
D. After the router ID is set, it does not change, even if the interface that the router is using for the router
ID goes down. The router ID changes only if the router reloads or if the OSPF routing process restarts.
E. In OSPF version 3, the OSPF router ID uses a 128-bit number.
Answer: A,B,D
Cisco examen 642-883 642-883 642-883 642-883 examen
NO.3 Which four statements are correct regarding IS-IS operations? (Choose four.)
A. By default, Level 1 routers within an IS-IS area do not carry any routing information external to the area
to which they belong. They use a default route to exit the area.
B. Summarization should be configured on the Level 2 routers, which injects the Level 2 routes into Level
1.
C. IS-IS supports "route leaking" in which selected Level 2 routes can be advertised by a Level 1/Level 2
router into Level 1.
D. The IS-IS backbone is a contiguous collection of Level 1 capable routers, each of which can be in a
different area.
E. With IS-IS, an individual router is in only one area, and the border between areas is on the link that
connects two routers that are in different areas.
F. Cisco IOS XR Software supports multitopology for IPv6 IS-IS unless single topology is explicitly
configured in IPv6 address-family configuration mode.
Answer: A,C,E,F
Cisco examen 642-883 642-883 examen
NO.4 When troubleshooting OSPF neighbor errors, which three verification steps should be considered.?
(Choose three.)
A. Verify if neighboring OSPF interfaces are configured in the same area.
B. Verify if neighboring OSPF interfaces are configured with the same OSPF process ID.
C. Verify if neighboring OSPF interfaces are configured with the same OSPF priority.
D. Verify if neighboring OSPF interfaces are configured with the same hello and dead intervals.
E. Verify if neighboring OSPF interfaces are configured with the same area type.
Answer: A,D,E
certification Cisco certification 642-883 642-883
NO.5 Which two OSPF network scenarios require OSPF virtual link configuration? (Choose two.)
A. to connect an OSPF non-backbone area to area 0 through another non-backbone area
B. to connect an NSSA area to an external routing domain
C. to connect two parts of a partitioned backbone area through a non-backbone area
D. to enable route leaking from Level 2 into Level 1
E. to enable route leaking from Level 1 into Level 2
F. to enable OSPF traffic engineering
Answer: A,C
Cisco 642-883 642-883
NO.6 Refer to the OSPF command exhibit.
Which effect does the no-summary command option have?
A. It will cause area 1 to be able to receive non-summarized inter-area routes.
B. It will cause area 1 to not receive any inter-area routes and will use a default route to reach networks in
other areas.
C. It will cause area 1 to not receive any external routes and will use a default route to reach the external
networks.
D. It will convert the NSSA area into a NSSA totally stubby area.
E. It will convert the stubby area into a NSSA.
F. It will disable OSPF auto-summary.
Answer: B
Cisco certification 642-883 642-883 642-883 examen
NO.7 What is function of the RP/0/RSP0/CPU0:PE1(config-ospf)#distance Cisco IOS-XR command?
A. To modify the administrative distance of the OSPF routes
B. To modify the default seed metric of the OSPF external routes
C. To modify the OSPF default reference bandwidth
D. To modify the OSPF cost
Answer: A
certification Cisco 642-883 642-883 642-883 examen
NO.8 In comparing IS-IS with OSPF, a Level-1-2 IS-IS router is similar to which kind of OSPF router?
A. ASBR on a normal OSPF area
B. ASBR on NSSA
C. ABR on totally stubby OSPF area
D. ABR on stubby OSPF area
E. ABR on a normal OSPF area
Answer: C
Cisco examen 642-883 642-883 examen
NO.9 On Cisco IOS XR Software, which set of commands is used to enable the gi0/0/0/1 interface for OSPF
in area 0?
A. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0
B. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 255.255.255.255
area 0
C. router ospf 1 area 0 interface GigabitEthernet0/0/0/1
D. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ip ospf 1 area 0
E. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
F. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
Answer: C
Cisco 642-883 642-883
NO.10 Refer to the PE1 router routing table output exhibit.
What is causing the i su 10.1.10.0/24 [115/30] via 0.0.0.0, 00:40:34, Null0 entry on the PE1 router routing
table?
A. The PE1 router is receiving the 10.1.10.0/24 summary route from the upstream L1/L2 IS-IS router.
B. The PE1 router has been configured to summarize the 10.1.10.x/32 IS-IS routes to 10.1.10.0/24.
C. The 10.1.10.0/24 has been suppressed because IS-IS auto-summary has been disabled on the PE1
router.
D. The 10.1.10.0/24 has been suppressed because of a route policy configuration on the PE1 router.
E. The 10.1.10.0/24 has been suppressed because the more specific 10.1.10.x/32 IS-IS routes have
been configured to leak into the IS-IS non-backbone area.
Answer: B
Cisco 642-883 certification 642-883 certification 642-883
Beaucoup de gens trouvent difficile à passer le test Cisco 642-883, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Cisco 642-883 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
没有评论:
发表评论