Dépenser assez de temps et d'argent pour réussir le test Microsoft 70-660 ne peut pas vous assurer à passer le test Microsoft 70-660 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
Le test Microsoft 70-660 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Microsoft 70-660 est une bonne examination. Mais c'est difficile à passer le test Microsoft 70-660. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Code d'Examen: 70-660
Nom d'Examen: Microsoft (TS:Windows Internals)
Questions et réponses: 68 Q&As
Le Certificat de Microsoft 70-660 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Microsoft 70-660, c'est-à-dire avoir une grande fortune. Le Certificat Microsoft 70-660 peut bien tester des connaissances professionnelles IT. La Q&A Microsoft 70-660 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Le test Microsoft 70-660 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft 70-660 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft 70-660.
Le test Microsoft 70-660 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Microsoft 70-660. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Microsoft 70-660.
70-660 Démo gratuit à télécharger: http://www.pass4test.fr/70-660.html
NO.1 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a colleague named Jason in the company. He has a computer named C01. C01
runs Windows Vista. He finds that a service process is using 100 percent of the processor. He has to
force a process dump of the service, meanwhile the service is consuming 100 percent of the processor.
He has no idea about which tool he should use. Since you are the technical support, he asks for your
answer. So which of the following tools should be used?
A.He should choose to use Umdh.exe
B.He should choose to use Tlist.exe
C.He should choose to use Pview.exe
D.He should choose to use Adplus.vbs
Answer:D
Microsoft 70-660 examen certification 70-660 70-660
NO.2 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a computer named c01. Windows Server 2008 is run by C01. Now you are
using WinDbg to debug C01. You find that one thread is waiting for a critical section. This section is
owned by another thread. You have to locate the critical section. Of the following WinDbg commands,
which one should be used?
A.You should choose to use.thread
B.You should choose to use !deadlock
C.You should choose to use!kdext.locks
D.You should choose to use!ntsdexts.locks
Answer:D
Microsoft 70-660 examen 70-660 examen 70-660 70-660 examen certification 70-660
NO.3 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of an application. This application runs at a customer's site. Because
of heap corruption, the application crashes intermittently. In order to enable yourself to check and resolve
the heap corruption, you ask the customer to have full page heap enabled on the application process. You
receive a user dump file from the customer. What you should do is to make it clear at the time that the
user dump was created, whether the full page heap was enabled. Of the following WinDbg commands,
which one should be used?
A.!vm should be used.
B.!gflag should be used.
C.!heap should be used.
D.!verifier should be used.
Answer:B
Microsoft 70-660 70-660 70-660 examen
NO.4 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are writing a user application that runs on Windows Server 2003. According to the
company requirement, a user application is being written by you. This application runs on Windows
Server 2003. User authentication is need by the design specification for the application. You must make
sure that each time the application is started, a local user name and password is entered by users. So
which routine should be used?
A.CredUIParseUserName()should be used.
B.LsaRegisterLogonProcess()should be used.
C.CredReadDomainCredentials() should be used.
D.CredUIPromptForCredentials()should be used.
Answer:D
Microsoft examen 70-660 examen certification 70-660
NO.5 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You have a device driver that has one monitoring thread named ThreadA. The device
driver has three worker threads. They are respectively named ThreadB, ThreadC, and ThreadD. The
worker threads run every 10 seconds and complete within 1 second. If any worker thread does not run at
least once every 30 seconds, ThreadA calls KeBugCheckEx, and then a complete kernel crash dump is
generated. A bug check and a complete kernel dump are generated by the computer. You find the
following after you review the complete kernel dump: You have to find out the root cause of the bug check.
So what caused the bug check to occur?
A.It was caused by the state of ThreadA
B.It was caused by the priority of ThreadA.
C.It was caused by the priority of ThreadD
D.It was caused by the state of ThreadA and ThreadB
E.It was caused by the state of ThreadB and ThreadC
Answer:C
Microsoft examen certification 70-660 70-660 70-660
NO.6 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, you are debugging a Windows device driver. An
unexpectedly long delay occurs on the device driver. You locate the problem in the following
synchronization mechanism. kd> dt var_sema Local var @ 0xf9dfbc48 Type _KSEMAPHORE +0x000
Header : _DISPATCHER_HEADER +0x010 Limit : 2 kd> dt nt!_DISPATCHER_HEADER f9dfbc48
+0x000 Type : 0x5 '' +0x001 Absolute : 0xe6 '' +0x002 Size : 0x5 '' +0x003 Inserted : 0xbb '' +0x004
SignalState : 0 +0x008 WaitListHead : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] kd> dt
nt!_KWAIT_BLOCK 0x819ca438 +0x000 WaitListEntry : _LIST_ENTRY [ 0xf9dfbc50 - 0xf9dfbc50 ]
+0x008 Thread : 0x819ca3c8 _KTHREAD +0x00c Object : 0xf9dfbc48 +0x010 NextWaitBlock :
0.819ca480 _KWAIT_BLOCK +0x014 WaitKey : 0 +0x016 WaitType : 1 kd> dt nt!_KWAIT_BLOCK
0xf9dfbc50 +0x000 WaitListEntry : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] +0x008 Thread :
0.00000002 _KTHREAD +0x00c Object : 0xfd050f80 +0x010 NextWaitBlock : 0xffffffff _KWAIT_BLOCK
+0x014 WaitKey : 0 +0x016 WaitType : 0 You have to find out the number of threads that the semaphore
currently has waiting. How many threads does the semaphore currently have waiting?
A.0
B.1
C.2
D.4
E.5
Answer:B
Microsoft 70-660 examen certification 70-660 certification 70-660 70-660 70-660
NO.7 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. For a hardware device, you are developing a Windows device driver. You will install the
device driver and hardware device on computers that run Windows Server 2008. Now you have to find out
the amount of time that the processor uses to receive and process interrupts. Which of the following tools
should be used?
A.You should choose to use Pview.exe
B.You should choose to use Taskmgr.exe
C.You should choose to use Eventvwr.msc
D.You should choose to use Perfmon.msc
Answer:D
Microsoft 70-660 70-660
NO.8 You are the IT professional who work in an International company named Wiikigo. You are
experienced in troubleshooting operating systems and applications that are not working correctly,
identifying code defects and so on. You have enough knowledge on windows internals and you provide
technical support for the company. You are in charge of an application service. Because of heap
corruption, it crashes intermittently. When it occurs, you have to detect the heap corruption. Of the
following tolls, which one should be used?
A.You should choose to use Page Heap
B.You should choose to use Special Pool
C.You should choose to use driver Verifier
D.You should choose to use Memory Pool Monitor
Answer:A
Microsoft 70-660 certification 70-660 70-660 70-660 examen
NO.9 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, an I/O dispatch routine is being written by you
for a Windows device driver. buffered I/O is supported by the device driver. 1 KB of data to the user
process is transferred by the dispatch routine. The kernel address of the 1-KB buffer needs to be retrieved
from the I/O request packet (IRP). Which field of the IRP contains the kernel address?
A.Irp->UserBuffer
B.Irp->Overlay.UserApcContext
C.Irp->Tail.Overlay.DriverContext[0]
D.Irp->AssociatedIrp.SystemBuffer
Answer:D
Microsoft 70-660 70-660 70-660 70-660 70-660 examen
NO.10 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of a multithreaded application. Now is being tested by you. You have
to use Perfmon to test the application for heap leaks. Of the following counters, which one should be
monitored?
A.Process\Private Bytes
B.Memory\Available Bytes
C.Memory\Committed Bytes
D.Process\Pool Paged Bytes
Answer:A
Microsoft examen 70-660 70-660 70-660 examen
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
没有评论:
发表评论