Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Cisco 642-457 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Cisco 642-457 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Cisco 642-457.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Cisco 642-457. Votre argent sera tout rendu si vous échouez le test.
Finalement, la Q&A Cisco 642-457 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Cisco 642-457 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Cisco, vous aurez un meilleur salaire et une plus grande space à se développer.
Code d'Examen: 642-457
Nom d'Examen: Cisco (Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0))
Questions et réponses: 130 Q&As
Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Cisco 642-457 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Cisco 642-457. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Cisco 642-457, vous aurez une meilleure préparation avec l'aide de Pass4Test.
Après une longue attente, les documentations de test Cisco 642-457 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Cisco 642-457 à la première fois.
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Cisco après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Cisco 642-457 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
642-457 Démo gratuit à télécharger: http://www.pass4test.fr/642-457.html
NO.1 Refer to the exhibit.
Which configuration elements must match for adjacent neighbors to establish a SAF neighbor
relationship?
A. the label name specified in the router eigrp command
B. the autonomous-system number specified in the service-family ipv4 autonomous-system command
C. the sf-interface configuration
D. the topology base configurations
E. the label name specified in the router eigrp command and the autonomous-system number
Answer: B
Cisco examen certification 642-457 642-457 certification 642-457
NO.2 Which statement about Service Advertisement Framework is true?
A.SAF requires that the EIGRP be configured on all routers, including non-SAF routers.
B.SAF requires that the EIGRP be configured only on SAF routers. Non-SAF routers act as an IP cloud.
C.SAF has no dependency on the underlying routing protocol, as long as it is a dynamic routing protocol.
Static routes are not supported.
D.SAF operates on any dynamic or static IP routing configuration. SAF is totally independent of the
underlying routing protocol.
Answer: D
Cisco examen certification 642-457 642-457 642-457 examen 642-457 642-457
NO.3 Which two features require or may require configuring a SIP trunk? (Choose two.)
A.SIP gateway
B.Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified
Communications Manager Express
C.Cisco Device Mobility
D.Cisco Unified Mobility
E.registering a SIP phone
Answer: AB
Cisco examen 642-457 642-457 642-457 642-457
NO.4 Refer to the exhibit.
Which trunks would be most suitable for Connection Y?
A.an H.225 trunk (gatekeeper-controlled)
B.intercluster trunk (gatekeeper-controlled)
C.a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster
D.intercluster trunk (nongatekeeper-controlled)
E.No extra connections are required. As long as IP connectivity exists, you need only configure a route
pattern for each site. The Cisco Unified Communications Manager will automatically forward the calls over
the WAN if the destination directory number is not registered locally.
Answer: D
Cisco 642-457 642-457 642-457 examen 642-457 examen
NO.5 Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone
so that users see the calling number in a local format?
A.Calling number localization is done using translation patterns.
B.Calling number localization is done using route patterns.
C.Calling number localization is done by configuring a calling party transformation CSS at the phone.
D.Calling number localization is done by configuring a calling party transformation CSS at the gateway.
E.Calling number localization is done by configuring the phone directory number in a localized format.
Answer: C
Cisco 642-457 642-457 examen 642-457
NO.6 Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for
TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for
international calls to the U.S. What should the TEHO-US route list configuration consist of?
A.First route group should point only to the U.K. gateway. The second route group should point to the U.S.
gateway.
B.First route group should be only the local route group. The second route group should point to the U.S.
gateway.
C.First route group should point only to the U.S. gateway. The second route group should be the local
route group.
D.The TEHO-US route list should contain only the local route group. The globalized configuration means
that the appropriate gateway will be selected automatically.
E.The \+! route pattern should point directly to the U.S. gateway.
Answer: C
certification Cisco 642-457 certification 642-457 642-457 642-457
NO.7 Which statement best describes globalized call routing in Cisco Unified Communications Manager?
A.All incoming calling numbers on the phones are displayed as an E.164 with the + prefix.
B.Call routing is based on numbers represented as an E.164 with the + prefix format.
C.All called numbers sent out to the PSTN are in E.164 with the + prefix format.
D.The CSS of all phones contain partitions assigned to route patterns that are in global format.
E.All phone directory numbers are configured as an E.164 with the + prefix.
Answer: B
Cisco 642-457 642-457
NO.8 When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized
to an internal directory number in Cisco Unified Communications Manager?
A.Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B.Normalization is done using route patterns.
C.Normalization is done using the gateway incoming called party prefixes based on number type.
D.Normalization is done using the gateway incoming calling party prefixes based on number type.
E.Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A
certification Cisco 642-457 certification 642-457 certification 642-457 642-457
NO.9 Assume that the Cisco IOS SAF Forwarder is configured correctly. Which minimum configurations on
Cisco Unified Communications Manager are needed for the SAF registration to take place?
A.SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Advertising Service
B.SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Requesting Service
C.SAF Trunk, SAF Security Profile, SAF Forwarder, CCD Requesting Service, and CCD Advertising
Service
D.SAF Trunk, SAF Security Profile, and SAF Forwarder
E.SAF Trunk, CCD Requesting Service, and CCD Advertising Service
Answer: B
Cisco certification 642-457 certification 642-457 642-457 642-457
NO.10 When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get
normalized to a global E.164 number with the + prefix in Cisco Unified Communications Manager?
A.Normalization is done using translation patterns.
B.Normalization is done using route patterns.
C.Normalization is done using the gateway incoming called party prefixes based on number type.
D.Normalization is done using the gateway incoming calling party prefixes based on number type.
E.Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: D
Cisco 642-457 certification 642-457 642-457 642-457 examen
NO.11 Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for
TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for
international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix. What
should the Called Party Transformation Pattern at the U.S. gateway be configured as?
A.\+.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +
B.\+1.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
C.\+408.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: 1
D.\+1408.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
E.\+1.408! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
Answer: D
Cisco 642-457 certification 642-457 642-457 642-457
NO.12 A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway.
What should the gateway type be?
A.H.323 gateway
B.Cisco 3825
C.Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D.The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E.The gateway can be added either as an H.323 gateway or Cisco 3825 series router.
Answer: A
certification Cisco 642-457 examen 642-457 examen 642-457
NO.13 Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for
TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for
international calls to the U.S. To match the US-TEHO pattern \+!, how should the translation pattern be
configured?
A.9001.4085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +
B.9.0014085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +1
C.900.14085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +1
D.900.14085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +
E.001.4085551234 with the Called Party Transformation:
Prefix Digits Outgoing Calls: +
Answer: D
certification Cisco 642-457 642-457 642-457 642-457
NO.14 Which method can be used to address variable-length dial plans?
A.Overlap sending and receiving.
B.Add a prefix for all calls that are longer than 10-digits long
C.Use nested translation patterns to eliminate inter-digit timeout
D.Use the @macro on the route pattern
E.Use MGCP gateways, which support variable-length dial plans
Answer: A
Cisco examen 642-457 642-457 examen 642-457
NO.15 Refer to the exhibit.
What should the destination IP address be configured as on the HQ and BR1 SIP trunks?
A.The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP
address should be 10.1.5.10.
B.The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address
through SAF learned routes.
C.The destination IP address will be learned automatically and configured on the SIP trunks after the
Cisco Unified Communications Managers discover themselves.
D.The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP
trunk destination IP address should be the BR1 SAF Forwarder IP address.
Answer: B
certification Cisco 642-457 certification 642-457 certification 642-457
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Cisco 642-457. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Cisco 642-457 sans aucune doute.
没有评论:
发表评论