2013年12月30日星期一

Pass4Test offre de Microsoft 70-659 matériaux d'essai

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Microsoft 70-659.

Est-que vous s'inquiétez encore à passer le test Certification 70-659 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Microsoft 70-659? Si vous voulez réussir le test Microsoft 70-659 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft 70-659 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Le Certificat de Microsoft 70-659 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Microsoft 70-659, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 70-659 sans aucun éffort, en même temps, le test de Microsoft 70-659 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Microsoft 70-659 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Les produits de Pass4Test sont préparés pour le test Certification Microsoft 70-659, y compris les formations et les informations ciblées au test Microsoft 70-659. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Code d'Examen: 70-659
Nom d'Examen: Microsoft (TS: Windows Server 2008 R2, Server Virtualization)
Questions et réponses: 145 Q&As

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Microsoft 70-659. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Microsoft 70-659. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

70-659 Démo gratuit à télécharger: http://www.pass4test.fr/70-659.html

NO.1 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your Hyper-V
environment.
Failures occur when you perform offline physical-to-virtual (P2V) conversions by using VMM.
You need to ensure that you have the information that is necessary to troubleshoot the problem.
What should you do?
A. Create the x:\Windows\inf\setupapi.dev.log file in Windows PE.
B. Create the scvmm_winpe.etl file on the root of the source computers boot volume
C. Create the scvmm_winpe_setupapi.log file on the root of the source computers boot volume
D. Create the scvmm_enable_winpe_tracing.txt file on the root of the source computers boot volume
Answer: D

Microsoft examen   70-659   70-659 examen

NO.2 You are configuring a virtual environment. The environment includes servers that run either Windows
Server 2003 or Windows Server 2008 R2. You manage the environment by using Microsoft System
Center Virtual Machine Manager (VMM) 2008 R2.
The servers that run Windows Server 2003 do not meet the system requirements to run Windows Server
2008 R2 or Microsoft Hyper-V Server 2008 R2.
You want to host non-production virtual machines (VMS) on the Windows Server 2003 servers.
You need to be able to manage the Windows Server 2003 servers by using VMM.
What should you do?
A. Install Virtual Machine Remote Control Client Plus (VMRCplus) on the Windows Server 2003 host
servers.
B. Stage the Microsoft Virtual Server 2005 R2 software on the VMM server.
C. Stage the Microsoft Virtual Server 2005 software on the VMM server.
D. Add the Windows Server 2003 host servers to VMM by using the Add Hosts wizard.
Answer: D

Microsoft examen   70-659 examen   70-659   certification 70-659

NO.3 You manage your virtual environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2. You monitor the environment by using Microsoft System Center Operations Manager
2007 R2.
You need to enable automatic migration between Hyper-V host servers.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a host group and add the host servers to it.
B. Configure reserve resources on each host server.
C. Use Intelligent Placement to place VMs on the host servers that have the highest rating.
D. Configure Performance and Resource Optimization (PRO) Tips.
Answer: CD

certification Microsoft   70-659 examen   certification 70-659   70-659   70-659 examen   70-659

NO.4 A company has a Windows Hyper-V Server 2008 R2 failover cluster.
You need to perform a configuration-only export of a virtual machine (VM).
What should you do?
A. In Hyper-V Manager, right-click the VM and select Export.
B. In Hyper-V Manager, rename the VM.
C. Create a custom .exp file with the VM name.
D. Create a PowerShell script that uses the Hyper-V API.
Answer: D

Microsoft examen   70-659   70-659   certification 70-659   certification 70-659

NO.5 You are configuring a Windows Server 2008 R2 Hyper-V server.
You need to audit changes to Hyper-V roles and authorization rights.
Which file should you audit?
A. AzMan.msc
B. web.config
C. InitialStore.xml
D. machine.config
Answer: C

Microsoft   certification 70-659   70-659 examen   70-659 examen

NO.6 A company has a Hyper-V server named SERVER01 that runs Windows Server 2008 R2 Enterprise
with Service Pack (SP) 1. All virtual machines (VMs) run Windows Server 2008 R2 Enterprise with SP1.
All VMs are configured to use Dynamic Memory.
A VM named VM01 is exhibiting performance problems.
You need to ascertain how much memory VM01 is consuming.
What should you do?
A. Use Performance Monitor to view the \Hyper-V Dynamic Memory Balancer\Available Memory
performance counter for SERVER01.
B. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Guest Visible Dynamic Memory
performance counter for VM01.
C. In the VM settings, view the Maximum RAM value.
D. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Physical Memory performance
counter for VM01.
Answer: A

Microsoft examen   70-659 examen   70-659   70-659

NO.7 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your
Hyper-Venvironment.
The finance department uses a legacy application that is not supported on Windows Server 2008 R2. The
application runs on a server that has the following configuration:
- Windows 2000 Server operating system
- One 10GB hard disk, FAT formatted
- 512 MB of RAM
You need to ensure that you can perform a physical-to-virtual (P2V) conversion of the server.
What should you do?
A. Run the convert c: /FS: NTFS command on the server.
B. Use offline P2V.
C. Increase the server's RAM to at least 1024 MB.
D. Use online P2V.
Answer: B

Microsoft   certification 70-659   certification 70-659   70-659   70-659 examen

NO.8 You manage your Hyper-V environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of several virtual machines (VMs).
In VMM, you need to configure the default placement options to consolidate the VMs on the fewest
possible host servers.
What should you do?
A. In the Convert Virtual Machine (V2V) Wizard, set the placement goal to Resource maximization.
B. In Administration view, set the placement goal to Resource maximization.
C. In Administration view, set the placement goal to Load balancing.
D. In the Convert virtual Machine (V2V) Wizard, set the placement goal to Load balancing.
Answer: B

Microsoft   70-659   70-659   70-659   70-659 examen

NO.9 You have a stand-alone server named SERVER01 that runs Windows Server 2008 R2 Enterprise with
service Pack l and Hyper-V. The server hosts 12 virtual machines (VMs). You add Hyper-V on a new
server named SERVER02. SERVER02 runs Windows Server 2008 R2 Enterprise. One of the VMs on
SERVER01 is configured to use dynamic memory. You export the VM.
The VM cannot be imported on SERVER02. You prepare to export the VM again.
You need to ensure that the exported VM can be imported on SERVER02.
What should you do?
A. Remove all DVD drive media from the VM.
B. Configure the VM to use static memory.
C. Start the VM and allow it to run.
D. Start and then pause the VM.
Answer: B

Microsoft   certification 70-659   70-659   70-659 examen   70-659

NO.10 A company has a server that runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2
with Service Pack (SP) 1 and Windows Server 2008 R2 Enterprise with Hyper-V.
The company is preparing to deploy virtual machines (VMs) from templates and has the following
requirements:
- The templates must be created from virtual hard disks (VHDs).
- The templates must include Windows 7.
- An out of the box experience (OOBE) must be provided for all guest operating systems that are
deployed from the templates.
You need to create a template that meets the company requirements.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:

NO.11 A company has virtual machine (VMs) running in a 16-node Hyper-V cluster. They are using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 to migrate all of their existing VMware VMs to
Hyper-V.
You need to configure VMM to ensure that it places VMs on each host until each host is fully utilized.
What should you do?
A. Configure placement settings for resource maximization.
B. Prioritize resources for memory free.
C. Prioritize resources for disk I/O.
D. Prioritize resources for network utilization.
E. Configure placement settings for load balancing.
Answer: AE

Microsoft   70-659   70-659 examen   70-659   70-659

NO.12 You use Hyper-V server 2008 R2 and failover clustering to host several virtual machines (VMs).
You plan to perform a Volume Shadow Copy (VSS) backup of a Cluster Shared Volume (CSV).
You need to ensure that resources can continue to use the CSV during the VSS backup.
What should you do?
A. Turn on maintenance mode for the CSV.
B. Configure your VSS-aware backup utility as a generic application in failover clustering.
C. Use Failover Cluster Manager to remove dependences from your disk resources.
D. Turn on redirected access for the CSV.
Answer: D

Microsoft examen   certification 70-659   70-659   70-659   70-659

NO.13 A company has a physical Windows 2008 R2 Server that they plan to migrate to a virtual machine
(VM).
You need to document the migration process.
How should you complete the diagram? (To answer drag the appropriate answers from th elist of answer
choices to the correct locations in the diagram (answer area).
Answer:

NO.14 A company uses Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage their
Hyper-V environment.
A VMM hardware profile is required for the new SQL Server 2008 R2 Enterprise VMs. Based on company
policy, VMs running SQL Server 2008 R2 Enterprise must use Dynamic Memory and the memory
allocation for the VMs must be set to high.
You need to configure a VMM hardware profile so that the memory allocation priority is set to high.
How should you configure the hardware profile? (To answer, select the appropriate node in the answer
area.)
Answer:

NO.15 Your company has an Active Directory Domain Services (AD DS) domain that includes an AD security
group named Development.
You have a member server that runs Windows Server 2008 R2 with the Hyper-V role installed.
You need to ensure that Development group members can only manage virtual machines (VMs).
Development group members must not have administrative privileges on the host server.
What should you use.?
A. Authorization Manager
B. the net localgroup command
C. Local Users and Groups
D. Active Directory Administrative Center
Answer: A

Microsoft   70-659   70-659 examen   70-659

NO.16 Your environment includes Hyper-V and VMware ESX. You manage your virtual environment by using
Microsoft System Center Virtual Machine manager (VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of a virtual machine (VM) that is located on the
ESX server.
You start the conversion by using the Convert Virtual Machine Wizard.
Communication between the destination host and the ESX server fails, and the conversion does not finish
successfully.
You need to ensure that the conversion finishes successfully.
What should you change?
A. WSMan permissions and settings
B. Windows Firewall exceptions for Background Intelligent Transfer Service (BITS)
C. Secure Shell (SSH) and HTTPS settings
D. Server Message Block (SMB) settings
Answer: C

Microsoft   70-659 examen   70-659

NO.17 A company's virtualization environment contains servers that run Windows Server 2008 R2 with
Hyper-V and other servers that run VMware. You manage the Hyper-V environment by using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 SP1. You manage the VMware vSphere 4
environment by using VMware vCenter.
You need to manage the VMware hosts by using VMM.
What should you do?
A. Add the vCenter server to VMM.
B. Move the VMware host to a host group.
C. Add a Library Server to VMM.
D. Perform a virtual-to-virtual (V2V) migration of the VMware VMs
Answer: A

Microsoft examen   70-659   70-659   70-659

NO.18 You use Hyper-V Server 2008 R2 and failover clustering to host several virtual machines (VMs).
You need to place a disk in maintenance mode.
Which Windows PowerShell cmdlet should you run?
A. Suspend-ClusterResource
B. Stop-ClusterResource
C. Set-ClusterResourceDependency
D. Block- ClusterAccess
Answer: A

Microsoft examen   70-659   certification 70-659   70-659 examen   certification 70-659

NO.19 You manage Hyper-V host servers and virtual machines (VMs) by using Microsoft System Center Virtual
Machine Manager (VMM) 2008 R2. You grant a user the Delegated Administrator user role.
You need to provide the user with the ability to manage VMs through the VMM Self-Service Portal.
What should you do?
A. In VMM, grant the user the Administrator user role.
B. In VMM, grant the user the Self-Service user role.
C. Enable the Single sign-on for Terminal Services option for the VMM Self-Service Portal.
D. Enable the Integrated Windows Authentication option for the VMM Self-Service Portal.
Answer: B

Microsoft   70-659 examen   70-659

NO.20 A company has a 64-bit server with a quad-core processor. The server runs Windows Hyper-v Server
2008 R2 Service pack(SP) 1. The server will host five virtual machines (VMs) with SP1 integration
services installed. VM1, VM2, and VM3 use the maximum number of logical processors. Resources
allocation for VMs is configured as shown in the following table.
The environment must be configured to meet the following resource allocation requirements:
- VM4 must be able to consume up to half of each processor
- VM5 must not start if VM1, VM2, VM3, and VM4 are running.
- VM4 must use the maximum number of logical processors available on the Hyper-V host
- VM4 must share CPU resources evenly with VM3 during peak usage on the Hyper-V host
You need to configure VM4 to meet the requirements.
How should you configure VM4? (To answer, drag the approbate setting from the list of choices to the
correct locations in the answer area.)
Answer:

La population de la Certification Microsoft 70-659 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

没有评论:

发表评论