L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification HP HP0-Y19. Les documentations particulièrement visée au test HP HP0-Y19 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test HP HP0-Y19.
Le test HP HP0-Y19 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test HP HP0-Y19 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification HP HP0-Y19.
Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test HP HP0-Y19, la voie à la réussite de votre professionnel sera ouverte pour vous.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test HP HP0-Y19 sans aucune doute si vous choisissez le Pass4Test.
Code d'Examen: HP0-Y19
Nom d'Examen: HP (ProCurve Accelerated ASE Mobility)
Questions et réponses: 63 Q&As
Si vous voulez ne se soucier plus à passer le test HP HP0-Y19, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test HP HP0-Y19. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A HP HP0-Y19 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
HP0-Y19 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y19.html
NO.1 You must configure Multiple Spanning Tree Protocol (MSTP) on two ProCurve 8212zl switches
and four 5406zl switches. Which configuration is necessary to ensure that all of the switches join
the same MST region?
A.The switches must have identical Port Priorities for shared links in each MST instance.
B.Bridge Priorities on all switches must be configured so that each MST instance has a different Root
Bridge.
C.All switch-to-switch links in each MST instance must be tagged members of all user VLANs.
D.The switches must be configured with identical config-names, config-revisions, and VLAN-to-instance
mappings.
Correct:D
HP certification HP0-Y19 HP0-Y19
NO.2 You configured VLAN 10 and VLAN 24 on a ProCurve Switch 3500yl-48G. The network servers
reside in VLAN 10, which has an IP address range of 10.1.10.0/24. Network clients reside in VLAN
24, which has an IP address range of 10.1.24.0/24. You configure an ACL with these entries and
apply it statically to ports in VLAN 24: permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq ftp
permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq http permit tcp 10.1.24.0 0.0.0.0
10.1.10.10 255.255.255.255 eq telnet What is the effect of these ACLs on the clients located in
VLAN 24?
A.They would have no access at all, because the ACL is misconfigured.
B.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but no access anywhere else.
C.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but full access to everything
else in the 10.1.10.0 subnet.
D.They could not access anything in the 10.1.10.0 subnet, because IP has not been specified in the ACL.
Correct:B
HP certification HP0-Y19 HP0-Y19
NO.3 You are planning a network upgrade at a small company. During a meeting, you learn that the
customer will install VoIP telephones that set Layer 2 priority markers for allvoice traffic, and the
VoIP traffic will not cross any routed links. What is necessary to ensure that ProVision ASIC
switches maintain the priorities set by the phones? (Selecttwo.)
A.LLDP-MED for all voice VLANs
B.an IEEE 802.1p-to-DSCP map for voice traffic
C.port-based priorities for ports connected to phones
D.default QoS settings
E.tagged links for all voice VLAN traffic
Correct:D E
HP certification HP0-Y19 HP0-Y19
NO.4 Which part of the multicast address range is reserved for applications that will remain within an
enterprise intranet?
A.Internetwork Control Block
B.AD-HOC Block
C.Administratively Scoped Address Block
D.Local Network Control Block
Correct:C
HP certification HP0-Y19 HP0-Y19
NO.5 Click the Exhibit button. What does this output from the show ip ospf neighbor command
indicate about the OSPF neighbor relationship between this router and the router with ID 10.3.0.1?
A.They are in different OSPF areas.
B.They have not formed an adjacency.
C.They are configured with different OSPF versions.
D.They are not eligible to be elected DR or BDR.
Correct:B
HP certification HP0-Y19 HP0-Y19
NO.6 Click the Exhibit button. What is the role of this Switch 3500yl in the OSPF routing domain?
A.ASBR
B.virtual router
C.ABR
D.internal router
Correct:D
HP certification HP0-Y19 HP0-Y19
NO.7 You must configure a ProCurve Switch 8212zl to be the Backup router for a VRID associated
with VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A.It must be an address assigned to a multi-netted interface.
B.It must be an address that is not assigned to any interface on either router.
C.It must match the Backup router's address for the VLAN 10 interface.
D.It must match the Owner router's address for the VLAN 10 interface.
Correct:D
HP certification HP0-Y19 HP0-Y19
NO.8 You connect an IP telephone that supports LLDP-MED to a port on a ProCurve Switch 5406zl.
The port is a member of a voice VLAN and also requires 802.1X authentication. How will
LLDP-MED and 802.1X interact?
A.The switch will exempt the phone from the 802.1X requirement after confirming its LLDP-MED
information.
B.The switch will submit the phone's authentication credentials to a RADIUS server after the devices
exchange LLDP-MED information.
C.The switch will permit LLDP-MED communication with the phone after authentication is complete.
D.The switch will use information from the phone's first LLDP-MED frame to submit its authentication
credentials.
Correct:C
HP certification HP0-Y19 HP0-Y19
NO.9 Port C1 on a ProCurve Switch 5412zl is a tagged member of VLAN 50 and an untagged member
of VLAN 1. Port C2 and port C3 are at default VLAN settings. What is the effect of the following
command entered at the CLI? 5412zl(config)# trunk c1-c3 trk1
A.The trunk is defined as an untagged member of VLAN 1, but port C1 is not included.
B.The trunk is not defined, because the ports' VLAN memberships do not match.
C.The trunk is defined as an untagged member of VLAN 1 and a tagged member of VLAN 50.
D.The trunk is defined as an untagged member of VLAN 1 but is not a member of VLAN 50.
Correct:D
HP certification HP0-Y19 HP0-Y19
NO.10 On a ProCurve Switch 8212zl, which feature must be enabled before you can enable VRRP?
A.MSTP
B.IP routing
C.IP multicast
D.RIP
Correct:B
HP certification HP0-Y19 HP0-Y19
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification HP HP0-Y19. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test HP HP0-Y19.
没有评论:
发表评论