1Y0-731 est un test de Citrix Certification, donc réussir 1Y0-731 est le premier pas à mettre le pied sur la Certifiction Citrix. Ça peut expliquer certiainement pourquoi le test Citrix 1Y0-731 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 1Y0-731. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
Vous allez choisir Pass4Test après essayer une partie de Q&A Citrix 1Y0-731 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Citrix 1Y0-731.
Code d'Examen: 1Y0-731
Nom d'Examen: Citrix (Citrix Netsoaler 8.0: Administration Exam)
Questions et réponses: 112 Q&As
Obtenez la Q&A de test Citrix 1Y0-731 de Pass4Test plus tôt, vous pouvez réussir le test Certification Citrix 1Y0-731 plus tôt.
Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Citrix 1Y0-731 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Citrix 1Y0-731 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Citrix 1Y0-731.
La population de la Certification Citrix 1Y0-731 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
1Y0-731 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-731.html
NO.1 A large e-commerce company is planning on integrating NetScaler systems into their network
environment. The company requires that the original client IP addresses be recorded in the web server
logs.
Which two features on the NetScaler could accomplish this? (Choose two.)
A. USIP
B. RNAT
C. USNIP
D. Edge mode
E. Client IP insertion
Answer: AE
Citrix certification 1Y0-731 1Y0-731 examen 1Y0-731 examen 1Y0-731
NO.2 Which type of VLAN is used when an administrator leaves the NetScaler system interfaces on the
default VLAN?
A. Tagged
B. Port-based
C. MAC-based
D. Protocol-based
Answer: B
Citrix certification 1Y0-731 1Y0-731 certification 1Y0-731
NO.3 The auditing and security policy of a company requires that all transactions that can be logged must be
logged. Which option must an administrator configure a syslog server for to meet this requirement?
A. Device counters
B. System counters
C. HTTP transactions
D. Audited commands
Answer: D
Citrix 1Y0-731 1Y0-731 certification 1Y0-731 1Y0-731
NO.4 How many untagged VLANs can an administrator configure on a single interface?
A. 1
B. 2
C. 16
D. 256
E. 4,096
Answer: A
Citrix 1Y0-731 examen 1Y0-731
NO.5 Scenario: An administrator is planning on deploying a NetScaler system into a network environment
using SNMP. The administrator plans on enabling the 11 SNMP traps relating to request and response
rates.
Which two objects must the administrator configure in order for the SNMP traps to send alerts? (Choose
two.)
A. SNMP destination
B. Source IP address
C. Threshold levels for the traps
D. Additional IP addresses on which the SNMP service can respond to SNMP queries
Answer: AC
Citrix 1Y0-731 1Y0-731
NO.6 Scenario: An administrator introduced two new servers into a server farm that can handle more traffic
than the older servers. The current load balancing method set for the virtual server managing the traffic
for this group of servers is Least Connections. The administrator wants to maintain the load balancing
method but also wants to use the new servers to improve performance by having them take more of the
traffic than the older servers.
Which advanced option must the administrator configure to achieve this?
A. Spillover
B. Max Client
C. Backup vserver
D. Service Weights
E. Global Setting Override
Answer: D
Citrix 1Y0-731 examen 1Y0-731 certification 1Y0-731
NO.7 An administrator should configure Link Aggregation on a NetScaler system when __________.
(Choose the correct option to complete the sentence.)
A. redundancy on a half duplex operation is required
B. redundancy on an operation across multiple data rates is required
C. network connections between LAN switches and network servers require more than 1Gb/sec
D. network connections between LAN switches and network servers require more than 8 Gb/sec
Answer: C
certification Citrix certification 1Y0-731 1Y0-731 examen certification 1Y0-731 certification 1Y0-731 certification 1Y0-731
NO.8 Which two modes could a NetScaler system be deployed in if all traffic must pass through the
NetScaler? (Choose two.)
A. HA inline
B. HA one-arm
C. Stand-alone inline
D. Stand-alone one-arm
Answer: AC
certification Citrix 1Y0-731 examen 1Y0-731 examen 1Y0-731 1Y0-731
NO.9 An administrator plans to configure a NetScaler system to resolve DNS queries using an external DNS
server with an IP address of 10.10.10.1.
Which command could the administrator use to configure this?
A. add nameserver DNS1 10.10.10.1
B. add lb vserver DNS1 dns 10.10.10.1
C. add server DNS1 10.10.10.1 -external
D. add nameserver DNS1 dns 10.10.10.1 -local
Answer: A
Citrix certification 1Y0-731 certification 1Y0-731 1Y0-731 1Y0-731
NO.10 Scenario: A company is deploying a NetScaler system in a network environment with some subnets
open to the public Internet and one non-routable subnet. The administrator plans on enabling
Use-Subnet-IP mode and disabling Use-Source-IP mode.
Which two IP addresses can the administrator set as source IP addresses for connections to back-end
servers?
(Choose two.)
A. VIP
B. MIP
C. SNIP
D. NSIP
Answer: BC
Citrix examen certification 1Y0-731 1Y0-731 certification 1Y0-731 1Y0-731 examen
NO.11 What does an administrator need to configure in order for a NetScaler system to advertise virtual IP
addresses, directly connected routes and static routes on the upstream routers?
A. Static Routes
B. Link Load Balancing
C. Route Health Injection
D. Front-end Health Check
Answer: C
certification Citrix 1Y0-731 1Y0-731
NO.12 A company is planning on implementing NetScaler systems in High Availability pairs.
Which entry in the NS.CONF file of the secondary system needs to be unique from those of the primary
system?
A. VMAC
B. Node ID
C. MIP address
D. NSIP address
Answer: D
certification Citrix 1Y0-731 1Y0-731
NO.13 Scenario: An administrator is planning to deploy NetScaler systems in an environment with multiple IP
subnets, one of which is non-routable. The company is an online retailer and needs outbound
connections from the non-routable subnet in order to verify credit cards.
What will an administrator need to configure to meet the company's requirements?
A. SIP
B. USIP
C. RNAT
D. USNIP
E. Layer 2 mode
Answer: C
Citrix 1Y0-731 1Y0-731 1Y0-731 examen 1Y0-731
NO.14 A multinational company with two server farms wants to set-up a NetScaler system with High
Availability as shown in the attached exhibit without using content switching.
How many virtual IP addresses will the administrator need for the environment set up to work?
Click the Exhibit button to view the environment.
A. One
B. Two
C. Three
D. Four
Answer: B
certification Citrix 1Y0-731 1Y0-731 examen
NO.15 Scenario: A company has distributed Internet sites and installations are spread across multiple
network locations and requires load balancing to be based on the client's proximity to the site, with the
least amount of configuration.
What must the administrator do to ensure GSLB uses the appropriate load balancing method?
A. Enable and configure Dynamic Proximity based Global Server Load Balancing.
B. Enable Dynamic Network Proximity based on the RTT of the client accessing the load balancing virtual
server.
C. Enable DNS view based Static Proximity through an Advanced expression to extract the client IP and
compare it to the subnet of the site.
D. Enable Proximity based Global Server Load Balancing and use the location's database to enter the
MAC address of all the clients and the corresponding site to which they should make the connection.
Answer: A
Citrix 1Y0-731 examen 1Y0-731 1Y0-731
NO.16 An SNMP manager attempted to poll for an OID but received the error message: "response timeout."
Which two options could the administrator have misconfigured for SNMPv2 to cause this error message?
(Choose two.)
A. SNMP user
B. SNMP group
C. SNMP manager
D. SNMP community
Answer: CD
Citrix 1Y0-731 1Y0-731 examen 1Y0-731 1Y0-731 1Y0-731
NO.17 Scenario: A company based in Beijing was unable to reach their data center for more than a week due
to a nearby earthquake. The company now has Distributed Data Centers in multiple regions, including a
disaster recovery center, to increase redundancy. The company wants their new NetScaler systems to
load balance these
centers.
Which NetScaler feature will allow load balancing across these centers only for redundancy?
A. Global Server Load Balancing to make load balancing decisions between the two sites
B. TCP-based content switching to make a decision between the load balance virtual servers
C. Proximity-based Global Server Load Balancing based on the RTT of client requests to virtual servers
D. SNMP load monitor bound to each location and bound to the default NetScaler metric table and with
the appropriate SNMP OIDs to load balance the different locations
Answer: A
certification Citrix certification 1Y0-731 1Y0-731 certification 1Y0-731 1Y0-731 1Y0-731
NO.18 Scenario: An administrator is configuring monitoring for web servers in the environment that often
results in services being marked as DOWN because of slow back-end servers. The administrator wants to
configure the virtual server and services so that existing connections stay open when a service is marked
down but not when a virtual server is marked DOWN.
How must the administrator configure the service and virtual server to reflect this dependency?
A. set lb vserver lbv1 -downStateFlush DISABLED
set service svc1 -downStateFlush ENABLED
B. set lb vserver lbv1 -downStateFlush ENABLED
set service svc1 -downStateFlush ENABLED
C. set lb vserver lbv1 -downStateFlush DISABLED
set service svc1 -downStateFlush DISABLED
D. set lb vserver lbv1 -downStateFlush ENABLED
set service svc 1 -downStateFlush DISABLED
Answer: D
Citrix 1Y0-731 certification 1Y0-731 1Y0-731 examen 1Y0-731
NO.19 Which option must an administrator enable on a NetScaler system to route packets that are not
destined for the NetScaler?
A. L2 mode
B. L3 mode
C. Static route advertisement
D. Dynamic route advertisement
Answer: B
Citrix 1Y0-731 examen 1Y0-731 1Y0-731
NO.20 What must an administrator configure the NetScaler log to record in order to know when someone has
altered the system configurations?
A. Access logs
B. Event messages
C. System counters
D. Audited commands
Answer: D
Citrix 1Y0-731 examen 1Y0-731 examen 1Y0-731 examen
Le test Citrix 1Y0-731 est l'un très improtant dans tous les tests de Certification Citrix, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
没有评论:
发表评论