HP meilleur examen HP0-J67, questions et réponses

Choisissez le Pass4Test, choisissez le succès de test HP HP0-J67. Bonne chance à vous.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test HP HP0-J67, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test HP HP0-J67 coûtant un peu d'argent.

Pour réussir le test HP HP0-J67 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test HP HP0-J67. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test HP HP0-J67 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test HP HP0-J67 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A HP HP0-J67 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test HP HP0-J67 plus facilement avec la Q&A de Pass4Test.

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

Code d'Examen: HP0-J67
Nom d'Examen: HP (Architecting Multi-site HP Storage Solutions)
Questions et réponses: 108 Q&As

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test HP HP0-J67 à se preuver. Mais le taux du succès et bien bas. Participer le test HP HP0-J67 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test HP HP0-J67 est une bonne examination. Mais c'est difficile à passer le test HP HP0-J67. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

HP0-J67 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J67.html

NO.1 You need to ensure data integrity on physical disks within the proposed HP 3PAR StoreServ
Storage array.
Which HP 3PAR StoreServ Storage component calculates the value of the disk T10 Data Integrity
Feature (DIF)?
A. HP Service Processor
B. HP InServ Controllers CPUs
C. Controller Cache Algorithm
D. HP 3PAR Gen4 ASIC
Answer: D

certification HP   HP0-J67   certification HP0-J67   HP0-J67 examen
Explanation:
In "The HP 3PAR Architecture"

NO.2 You are tuning a customer HP StoreOnce Backup System and notice they are running backups
20 hours a day. As a result, backup jobs are running during the same time as replication jobs. What
can you do to limit the available bandwidth and not saturate the link with replication traffic?
A. Enable multiplexing and set concurrency to 1.
B. Enable concurrency control.
C. Map multiple source libraries into a single target library.
D. Enable compression.
Answer: B

HP   certification HP0-J67   HP0-J67 examen   HP0-J67   certification HP0-J67
Explanation:
Hewlett-Packard StoreOnce B6000 Configuration Manual Page 40: "7. The use of "concurrency
control" is not necessary if replication is run at separate times from backups and housekeeping.
However, if the customer wants to run replication at the same time as backups or housekeeping,
they can use concurrency control to limit the available bandwidth so as not to saturate the link with
replication traffic"

NO.3 Your customer wants to upgrade their existing HP 3PAR S-Class array. A competitor has
suggested a non-HP storage array. Your conversation with the customer focuses on the notable
architectural enhancements within the new generation of HP 3PAR StoreServ 7400 platforms.
Which enhancements should you focus on? (Select two.)
A. The tightly coupled cache-coherent clustering is built into the Gen4 ASIC.
B. The 64-bit OS enables scalable headroom for performance and capacity.
C. Logical Disk regions have increased from 256 MB and are now 1 GB in size.
D. Write cache mirroring is now implemented N+N across the 7x00 controllers.
E. New HP StoreServ 7x00 now supports 16Gb Fibre Channel speeds.
Answer: A,D

certification HP   HP0-J67   HP0-J67 examen   HP0-J67   HP0-J67

NO.4 Your customer wants to replicate backup data from branch offices to a primary data center
where an HP StoreOnce 4430 Backup System using HP StoreOnce Catalyst is located. The main
backup application is HP Data Protector 7.01. The file and application servers have Windows 2003,
Windows 2008, and SUSE Linux 9 and 10 installed. The file and application servers are a mixture of
32 and 64 bit Windows and Linux operating systems. As a long-term strategy, thecustomer wants to
migrate all services to the primary data center. No additional hardware can be purchased for the
branch offices, and complexity should be minimized.
Which deduplication type is optimal for this customer?
A. source-side
B. application-side
C. target-side
D. server-side
Answer: D

HP   HP0-J67 examen   HP0-J67   HP0-J67   HP0-J67
Explanation:
Target-side NOT: "Target-side Deduplication can be used for conventional B2D environments where
full bandwidth links are used between the media server and the Deduplicated Data Store."
Application-side NOT exist. Source-side NOT: Limited agents for OS to use Source-side. 32bits not
compatible. "Note that the backed up system must support deduplication (64-bit Windows systems
or 64-bit Linux systems only, for details, see the support matrices)." Server-side: "Note that the
Media Agent client must support deduplication (64-bit Windows systems or 64-bit Linux systems
only, for details, see the support matrices). Server-side deduplication enables you to deduplicate
data from clients on which deduplication is not supported locally."
7. The customer has two HP 3PAR StoreServ 7000 Storage systems split between two data
centers. Used capacity of each storage system is 10 TB of data. The replication between data centers
is performed via Ethernet/IP , and the replication technology used will be asynchronous. The
maximum RPO is 30 minutes, and the daily change rate of the customer data is a maximum of 0.5%,
which is created evenly throughout the day.
What is the required minimum bandwidth between the data centers for replication?
A. 40 Mb half-duplex
B. 20 Mb full-duplex
C. 5 Mb half-duplex
D. 10 Mb full-duplex
Answer: D

certification HP   HP0-J67 examen   HP0-J67 examen
8. During an HP customer assessment workshop, the Alinean report shown in the exhibit is
created. Which cost saving should you highlight in your presentation when positioning the value of
HP 3PAR StoreServ Thin Technologies?
A. planned downtime
B. unplanned downtime
C. application integration
D. power and cooling
Answer: A

HP   HP0-J67   HP0-J67 examen   HP0-J67   HP0-J67 examen
9. A customer has an environment spanning two data centers in a campus environment. The
primary storage is an HP 3PAR StoreServ 10400 Storage System. Data is replicated between sites
with an RPO of zero. The customer is questioning whether they have adequate protection. You
suggest creating a DR site and actively replicate the data to it.
What are the implications of adding the third data center to the data network?
A. 10GbE links are needed to interconnect the HP StoreServ 3PAR arrays.
B. The data network must support Converged Enhanced Ethernet.
C. The data network must support OpenStack.
D. A dedicated subnet must be added to interconnect the 3PAR arrays.
Answer: D

HP   HP0-J67 examen   certification HP0-J67   certification HP0-J67   HP0-J67
10. A customer has an environment that spans two data centers in a campus environment. The
primary storage is HP 3PAR 10400, and data is replicated between sites with an RPO of zero.
Recent bad weather has caused flooding near the customer site and the customer is questioning
whether they have adequate protection. You suggest creating a data center at a remote location
and actively replicating the data to it. The customer is concerned that the remote link to the third
site will have insufficient bandwidth and will create a local replication bottleneck.
Which statement addresses the customer concerns?
A. Synchronous Long Distance will schedule data replication outside high latency periods autonomic
array
B. Data is transmitted in a continuous stream with write order being handled by the target array.
C. Remote Copy uses multiple connections over the same link from multiple volumes.
D. Over provisioning of the remote link will ensure enough bandwidth is always available for
replication.
Answer: C

HP   HP0-J67   HP0-J67   HP0-J67
11. You are performing a demo of an HP StoreOnce 2620i Backup System solution in combination
with HP Data Protector. All best practice guidelines for the VTL and Data Protector have been
adhered to. However, you receive the following error when formatting a cartridge in a
previously-created VTL.
[Normal] From: MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:09 PM
Tape0:0:0:0C
Initializing new medium: "[4E94F289] 4E94F289"
[Major] From: MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:10 PM [90:51]
Tape0:0:0:0C
Cannot write to device ([87] Wrong parameter. )
[Major] From: MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:10 PM
Initialization of medium failed.
[Normal] From MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:14 PM
Ejecting medium Tape0:0:0:0C".
What must you do to perform a successful demo?
A. Add an iSNS-Server in the media Server iSCSI configuration, and restart the iSCSI service.
B. Disable "Automatically discover changed SCSI address" for the VTL drives, and rescan the library.
C. Disable "SCSI Reserve /Release (drive)" for all of the drives and robotics in the environment and
rescan the library.
D. Change the maximum transfer length of the iSCSI initiator in regedit. and restart the media server.
Answer: C

certification HP   HP0-J67 examen   HP0-J67
12. A customer with a B-Series fabric needs to establish FC-IP connectivity between their primary
data center fabric and DR data center fabric to enable replication. However, they are concerned that
fabric instability issues in the DR fabric will cause issues in their production fabric.
Which HP storage solution should you recommend?
A. HP C-Series MDS 9222i Multiservice Modular Fabric Switch
B. HP 1606 Extension SAN Switch
C. HP SN6000 FC Switch
D. HP MPX200 Multifunction Routed
Answer: D

HP   HP0-J67   HP0-J67 examen   HP0-J67   certification HP0-J67
13. Which HP 3PAR StoreServ feature improves storage array resiliency?
A. Persistence Ports
B. Virtual Lock
C. Virtual Copy
D. Virtual Domains
Answer: A

certification HP   HP0-J67   HP0-J67   HP0-J67
Explanation:
"To provide greater resiliency and to avoid dependency on host multi-pathing software, HP 3PAR
StoreServ has introduced a new feature called Persistent Ports." - in HP 3PAR High Availability
14. You are designing a storage solution for a customer concerned about storage availability
during code upgrades. Which HP 3PAR Port Persistence node identity handles host I/O requests,
thus providing greater resiliency during code upgrades?
A. Guest
B. Master
C. Slave
D. Native
Answer: A

HP examen   certification HP0-J67   certification HP0-J67   certification HP0-J67
Explanation:
Persistent Ports This is a really cool feature as well - it gives the ability to provide redundant
connectivity to multiple controllers on a 3PAR array without having to have host-based multipathing
software.How is this possible? Basically it is NPIV for the array. Peer controllers can assume the
world wide names for the ports on their partner controller.
If a controller goes down, it's peer assumes the identities of that controller's ports, instantaneously
providing connectivity for hosts that were (not directly) connected to the ports on the downed
controller. This eliminates pauses for MPIO software to detect faults and fail over, and generally
makes life a better place.
15. A customer asks you to architect a new SAN fabric infrastructure comprised of redundant
fabrics for a test/dev server environment. They need to provide selective connectivity for
array-based snapshots from disk arrays hosted on the existing Cisco MDS 9506 Multilayer
director-based production fabric, to hosts on the test/dev fabric. A customer requirement is to
utilize a differentvendor for the test/dev fabric, Which SAN technology enables the test/dev SAN
fabric to maintain interoperability between the two fabrics and meet the stated requirements?
A. HP B-Series with Transparent Router (TR)
B. HP H-Series with Transparent Router (TR)
C. HP B Series with Inter-VSAN Routing (iVR)
D. HP H-Series with Inter-Fabric Routing (IFR)
Answer: B

HP   HP0-J67 examen   HP0-J67   certification HP0-J67   HP0-J67

NO.5 You are discussing cost reduction quality management, and business growth with a client.
According to industry best practices, which CxO are you meeting with?
A. CFO
B. CIO
C. COO
D. CEO
Answer: D

HP examen   HP0-J67 examen   HP0-J67   HP0-J67   HP0-J67 examen

NO.6 Your customer is migrating to VMware vSphere 5. Your solution includes HP 3PAR StoreServ
Storage with licenses for Remote Copy and sub-LUN tiering. The customer is interested in
implementing VMware Storage I/O Control and asks if there are any interoperability concerns with
your solution.
How does the inclusion of VMware Storage I/O Control impact your solution?
A. VMware Storage I/O Control integrates into the proposed solution with no changes.
B. HP 3PAR Application Software Suite for VMware must be added to the solution
C. HP 3PAR Adaptive Optimization cannot be used in the solution.
D. VMware Adaptive Queue Depth Throttling must be enabled.
Answer: A

HP   HP0-J67   HP0-J67

Dans cette Industrie IT intense, le succès de test HP HP0-J67 peut augmenter le salaire. Les gens d'obtenir le Certificat HP HP0-J67 peuvent gagner beaucoup plus que les gens sans Certificat HP HP0-J67. Le problème est comment on peut réussir le test plus facile?