Vous aurez une assurance 100% à réussir le test Microsoft 070-401 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
Si vous voulez ne se soucier plus à passer le test Microsoft 070-401, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Microsoft 070-401. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Microsoft 070-401 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Microsoft 070-401 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Est-ce que vous vous souciez encore de réussir le test Microsoft 070-401? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Code d'Examen: 070-401
Nom d'Examen: Microsoft (MS System Center Configuration Manager2007, Configuring)
Questions et réponses: 130 Q&As
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
070-401 Démo gratuit à télécharger: http://www.pass4test.fr/070-401.html
NO.1 You have a Systems Management Server (SMS) 2003 environment. Your central site is in the United
States, and you have a primary child site in Germany. The central site is running Microsoft Windows
Server 2003 software for the English language. The primary child site is running Windows Server 2003
software for the German language.
You are upgrading your environment to System Center Configuration Manager 2007.
You need to enable the SMS Provider role for the primary child site.
What should you do.?
A. Install the SMS Provider on the central site on the German version of Windows Server 2003.
B. Install the SMS Provider on the central site on the English version of Windows Server 2003.
C. Install the SMS Provider on the primary child site on the German version of Windows Server 2003.
D. Install the SMS Provider on the primary child site on the English version of Windows Server 2003.
Answer: C
Microsoft certification 070-401 070-401 examen 070-401 examen 070-401
NO.2 Your System Center Configuration Manager 2007 environment has a single site server. You attempt to
perform a client push installation to Microsoft Windows computers. On some of the computers, the
installation fails and generates an Access denied error message.
You need to ensure that the client push installation is performed successfully.
What should you do?
A. On the site server, grant the Client Push Installation account local administrator permissions.
B. On the affected Windows computers, grant the Client Push Installation account local administrator
permissions.
C. On the affected Windows computers, grant the Client Push Installation account the Access this
computer from the network right.
D. On the affected Windows computers, add the Client Push Installation account to the Power Users
group.
Answer: B
Microsoft 070-401 070-401
NO.3 You have a System Center Configuration Manager 2007 environment.
Currently, you collect software inventory data on a monthly basis.
You need to ensure that all software inventory reports include data about software that was installed as
recently as the past seven days.
What should you do?
A. Configure the software update point synchronization schedule to run every seven days.
B. Create a custom Configuration Manager Web report to display all software inventory changes that
occurred within the past seven days.
C. Configure the Software Updates client agent to run every seven days.
D. Configure the Software Inventory client agent to run every seven days.
Answer: D
certification Microsoft 070-401 examen certification 070-401 070-401 examen
NO.4 You have a System Center Configuration Manager 2007 environment. You have a secondary site at a
branch office. The branch office is connected to the main office by a 512-Kbps (kilobits per second) WAN
link.
You need to eliminate all package distribution traffic on the WAN from the primary site between 3:00
P.M.and 5:00 P.M.
Which two tasks should you do on the sender address(Each correct answer presents part of the
solution.Choose two.)
A. Configure rate limits for the primary site.
B. Configure pulse mode for the primary site.
C. Configure pulse mode for the secondary site.
D. Configure a schedule for the primary site.
Answer: AD
Microsoft examen 070-401 examen 070-401 examen 070-401 070-401
NO.5 You have a System Center Configuration Manager 2007 environment. You publish an accounting
application to a distribution point.
You need to restrict access to the files on the distribution point.
What should you do?
A. Create a Client Push Installation account, and refresh the distribution point.
B. Create a Software Update Point Connection account, and refresh the distribution point.
C. Create a Package Access account, and refresh the distribution point.
D. Create a Software Update Point Proxy Server account, and refresh the distribution point.
Answer: C
Microsoft examen 070-401 070-401
NO.6 You install System Center Configuration Manager 2007 in your Active Directory environment.
You need to ensure that client agent installation automatically retrieves client deployment parameters
from Active Directory Domain Services.
You extend the Active Directory schema. You create the System Management container. Which two
actions should you perform? next(Each correct answer presents part of the solution. Choose two.)
A. Import the contents of the ConfigMgr_ad_schema.ldf file into Active Directory Domain Services.
B. Set security permissions on the System Management container.
C. Add the server account for the first installed site server to the Schema Admins global security group.
D. Enable Active Directory publishing for the Configuration Manager site.
Answer: BD
Microsoft 070-401 examen 070-401
NO.7 You have a System Center Configuration Manager 2007 environment. You install a secondary site at a
branch office, and you configure the local IP subnet as the site boundary. The branch office site is
connected to the primary site by a 192-Kbps (kilobits per second) WAN link. You need to minimize
bandwidth utilization for all client agent policies from the branch office.
What should you do?
A. Install a proxy management point at the secondary site.
B. Install a branch distribution point at the secondary site.
C. Configure all software package advertisements to Download content from distribution point and run
locally.
D. Configure all software package advertisements to Run program from distribution point.
Answer: A
Microsoft examen 070-401 070-401 certification 070-401 070-401
NO.8 You have a System Center Configuration Manager 2007 environment. You have a primary site named
P01 in the main office. The Active Directory site named Site001 is assigned to P01 boundaries.
You establish a new branch office that has an Active Directory site named Site002.
You install a child site named S01 in the branch office. S01 is configured with a distribution point and a
management point.
You need to assign client computers in the branch office to site S01.
What should you do?
A. Create a site boundary for S01 that contains all IP subnets for the branch office.
B. Create a protected site system boundary on P01 that contains all IP subnets for the main office.
C. Create a protected site system boundary on P01 that contains all IP subnets for the branch office.
D. Modify Site001 to include subnets for the branch office.
Answer: A
Microsoft 070-401 070-401 certification 070-401 070-401
NO.9 You have a System Center Configuration Manager 2007 environment.
You install the Configuration Manager client agent on all Microsoft Windows 2000 Professional and
Microsoft Windows XP Professional computers in the environment.
You need to ensure that you can remotely control user sessions on all computers.
What should you do?
A. Configure Remote Desktop settings by using a Group Policy object (GPO).
B. Configure Remote Desktop settings in the Remote Tools client agent.
C. Configure Remote Tools settings in the Remote Tools client agent.
D. Configure Remote Assistance in the Remote Tools client agent.
Answer: C
Microsoft 070-401 examen 070-401 certification 070-401
NO.10 You have a System Center Configuration Manager 2007 environment. You have a central site named
C01 and a primary child site named S01.
You notice that computers in the Active Directory site named Site001 are assigned to C01 and S01.
You need to ensure that computers in Site001 are assigned to S01.
What should you do?
A. Remove the Active Directory Site Boundary Site001 from S01.
B. Remove the Active Directory Site Boundary Site001 from C01.
C. Enable client push installation on S01 by using a command-line argument of SMSSITECODE=S01.
D. Enable client push installation on S01 by using a command-line argument of SMSSITECODE=AUTO.
E. Configure the Site001 boundary on C01 as a Slow or unreliable network, and configure the Site001
boundary on S01 as a Fast (LAN) network.
Answer: B
Microsoft 070-401 examen 070-401 examen 070-401 examen 070-401
NO.11 You have a System Center Configuration Manager 2007 environment. You create a new child site
named S01 at a new branch office. You deploy the management point and the software update point.
Computers in the S01 site are able to detect Microsoft security updates, but the computers are not able to
install the updates successfully.
You need to configure the S01 site so that client computers can install security updates.
What should you do?
A. Configure the software update point to synchronize from an upstream update server.
B. Configure a distribution point for S01. Send the update packages to the distribution point.
C. Configure the system health validator point. Enable the Advertised Programs client agent.
D. Enable software update point client installation. Configure the Network Access account for S01.
Answer: B
certification Microsoft certification 070-401 070-401
NO.12 You have a System Center Configuration Manager 2007 environment. Local client computers receive
software updates from Configuration Manager.
You need to ensure that remote client computers that connect to the virtual private network (VPN) are
able to receive software updates.
What should you do?
A. Create a new site system, and configure it with the Software Update Point role.
B. Create a new site system, and configure it with the SMS Provider role.
C. Add the IP subnets that the VPN uses to the network discovery.
D. Create a new site boundary, and add the IP subnets that the VPN uses to the site boundary.
Answer: D
Microsoft examen 070-401 examen certification 070-401 070-401 examen
NO.13 You are planning an upgrade of your Systems Management Server (SMS) 2003 central site to System
Center Configuration Manager 2007. SQL Server replication is enabled on the SMS 2003 site database.
You need to test the upgrade of the SMS 2003 site database to Configuration Manager 2007.
You create a parallel test environment. Which two actions should you perform? in the test environment?
(Each correct answer presents part of the solution. Choose two.)
A. Delete any existing local SQL Server replication subscriptions, and configure the SMS 2003 site
database to publish for replication.
B. Delete any existing local SQL Server replication subscriptions, and disable replication on the SMS
2003 site database.
C. Run Configuration Manager 2007 Setup on the SMS 2003 site database with the /testdbupgrade
switch.
D. Run Configuration Manager 2007 Setup on the SMS 2003 site database with the /prereq switch.
Answer: BC
Microsoft 070-401 070-401 examen 070-401
NO.14 you have a System Center Configuration Manager 2007 environment. You install a secondary site at a
branch office.
You discover that communication is not occurring between the secondary site and its parent site.
You need to ensure two-way communication between the secondary site and its parent site.
What should you do?
A. On the parent site, create a standard sender address to the secondary site.
B. On the parent site, create an asynchronous RAS sender to the secondary site.
C. On the secondary site, create an asynchronous RAS sender to the parent site.
D. On the secondary site, publish the Configuration Manager site information to Active Directory.
Answer: A
Microsoft examen 070-401 070-401 070-401 070-401
NO.15 You have a System Center Configuration Manager 2007 environment. The site named S01 is located on
the intranet. S01 uses a server in the perimeter network to provide a management point to Internet-based
client computers.
You need to configure the server roles in the perimeter network to communicate to the S01 site. Which
two actions should you perform?(Each correct answer presents part of the solution. Choose two.)
A. Configure the Network Access account on S01.
B. Configure S01 to use the site server s computer account to install site systems.
C. Configure the S01 site system property to allow only site server initiated data transfers from the site
system.
D. Configure a Site System Installation account on S01.
Answer: CD
Microsoft examen 070-401 examen certification 070-401 certification 070-401 070-401 examen
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Microsoft 070-401. Il n'y a pas de soucis à réussir le test avec une haute note.
没有评论:
发表评论