HP HP0-Y32 examen pratique questions et réponses

Vous allez choisir Pass4Test après essayer une partie de Q&A HP HP0-Y32 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification HP HP0-Y32.

L'équipe de Pass4Test rehcerche la Q&A de test certification HP HP0-Y32 en visant le test HP HP0-Y32. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test HP HP0-Y32 sans aucune doute.

Si vous vous inscriez le test HP HP0-Y32, vous devez choisir une bonne Q&A. Le test HP HP0-Y32 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test HP HP0-Y32 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A HP HP0-Y32 de Pass4Test.

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de HP après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Code d'Examen: HP0-Y32
Nom d'Examen: HP (Design and Troubleshooting Open Standard Networks)
Questions et réponses: 75 Q&As

HP0-Y32 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y32.html

NO.1 Click the Exhibit button.
You need to limit the amount of broadcast traffic in this customer's network. In order to do so, you add a
second VLAN, VLAN2 (10.0.1.0/24). Now, clients on VLAN2 cannot reach the Internet and cannot ping
clients on VLAN1. They can successfully ping the default gateway (10.0.1.1). What should you do first to
determine the cause of the problem?
A. Disable broadcast limiting on the core switch.
B. Check the ISP's firewall settings and modify accordingly.
C. Request the configuration of the network devices.
D. Request a network trace from the ISP.
E. Get the MAC address table of the network devices.
Answer: C

HP   HP0-Y32   HP0-Y32 examen   certification HP0-Y32   certification HP0-Y32

NO.2 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. What is the impact of the user's actions?
A. Internet connectivity to subnet 20 users is broken.
B. STP Root Bridge of Subnet 20 moves.
C. All Subnet 20 traffic is routed through Subnet 30.
D. STP alternate path selection remains unchanged.
Answer: B

HP   HP0-Y32 examen   HP0-Y32   HP0-Y32   HP0-Y32 examen

NO.3 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which link transitions are blocked on subnet
20?
A. link from 20b to 20c
B. link from 20a to 20c
C. link from 20a to 20b
D. link from 20c to 30b
Answer: C

HP   HP0-Y32   HP0-Y32 examen   HP0-Y32

NO.4 Click the Exhibit button.
Which issue does the Optical Time Domain Reflectometer (OTDR) show?
A. out of phase
B. extensive attenuation
C. loss of [optical] signal
D. bend or kink in the optical cable
E. low frequency roll-off C:\Pasban Work\Cert Paper
Exams\HP\HP0-Y32\HP0-Y32-A-Extracted\HP0-Y32-A-Extracted\HP0-Y32-A\23.JPG
Answer: D

HP   HP0-Y32   HP0-Y32   HP0-Y32 examen   HP0-Y32 examen   HP0-Y32 examen

NO.5 Which step will provide helpful information about the issue?
A. Analyze the port statistics for the client you are pinging from.
B. Compare the arp table entries on the client when it works and when it does not.
C. Analyze the port statistics for the switch to which the client is connected.
D. Analyze the port statistics for all clients in VLAN 2 when the problem occurs.
Answer: B

HP examen   HP0-Y32   HP0-Y32   HP0-Y32

NO.6 You are working with a customer who has reported connectivity issues on a specific VLAN. All of their
clients were previously in VLAN1 until VLAN10 was added in order to limit the amount of broadcast traffic.
Now, the clients on VLAN10 cannot reach the Internet. These clients cannot ping clients on VLAN1, but
can successfully ping the default gateway. Which information will help you troubleshoot this problem?
(Select two.)
A. network topology map
B. uptime of the network devices
C. network IP addressing scheme
D. names of all VLANS
E. a list of the NTP servers on the network
Answer: AC

HP   certification HP0-Y32   HP0-Y32   HP0-Y32

NO.7 Click the Exhibit button.
You install two E5400 zl Series switches and connect them with a two-port static trunk. All hosts on both
switches are in VLAN 20. However, some hosts on Core 1 cannot ping some hosts on Core 2 and vice
versa. All hosts can ping all hosts on their own switch. Event logs on the two switches do not show
significant errors. What should you do to determine the cause of this connectivity issue? (Select three.)
A. Use traceroute to determine which device is dropping the ping packets.
B. Verify the trunk configuration on each core switch.
C. Change the IP address for the default VLAN on Core 2 so that it is in the same subnet as the default
VLAN on Core 1.
D. Verify physical connectivity between the switches.
E. Use LLDP to check the identities of the devices and their neighbors.
Answer: BDE

HP   certification HP0-Y32   HP0-Y32   HP0-Y32   HP0-Y32   HP0-Y32

NO.8 Based on these basic facts, what can you "rule out" as possible causes of this problem? (Select three.)
A. the external gateway having no route to VLAN 2
B. misconfigured clients in VLAN1
C. a transient layer 1 issue
D. the firewall enabled on the client causing connectivity issues
E. a loop in VLAN1
Answer: ACD

HP examen   HP0-Y32   HP0-Y32   HP0-Y32 examen

NO.9 You install new category 6a home run network cables for all users. You test a random sampling of the
cables, and they all pass. Users are complaining about dropped packets, slowness, and other intermittent
results. What is the best tool to use for initial troubleshooting?
A. Simple Network Management Protocol (SNMP)
B. Time Domain Reflectometer (TDR)
C. Packet Analyzer
D. HP Intelligent Communications Manager (ICM)
Answer: B

HP examen   HP0-Y32   HP0-Y32   HP0-Y32

NO.10 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which action can you take that will help you
discover this new link?
A. Investigate switch syslog information for gateway changes.
B. Compare route tables of both routers.
C. Review LLDP information on subnet 20 root bridge.
D. Follow path cost to root from subnet 20.
E. Initiate a traceroute from both subnets.
Answer: D

HP   HP0-Y32   certification HP0-Y32   HP0-Y32

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.