Pour réussir le test HP HP0-Y12 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test HP HP0-Y12. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test HP HP0-Y12 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Après une longue attente, les documentations de test HP HP0-Y12 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test HP HP0-Y12 à la première fois.
Code d'Examen: HP0-Y12
Nom d'Examen: HP (Building ProCurve Resilient, Adaptive Networks)
Questions et réponses: 116 Q&As
Le Certificat HP HP0-Y12 est un passport rêvé par beaucoup de professionnels IT. Le test HP HP0-Y12 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test HP HP0-Y12. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test HP HP0-Y12 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A HP HP0-Y12 pour prendre un essai.
Est-que vous s'inquiétez encore à passer le test Certification HP0-Y12 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de HP HP0-Y12? Si vous voulez réussir le test HP HP0-Y12 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
Vous aurez une assurance 100% à réussir le test HP HP0-Y12 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
HP0-Y12 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y12.html
NO.1 You must design an IP addressing scheme for a network that must support 16 different types of users,
each with
different resource and security requirements. What is an advantage of ensuring that the number of
networks assigned to
each type of user is a power of 2?
A. It enables automatic summarization at classful boundaries.
B. It minimizes the number of VLANs required to support each type of user.
C. It ensures that an adequate number of IP addresses will be available for each type of user.
D. It simplifies summarization because all networks for each type of user can be summarized in a single
routing statement.
Answer: D
HP examen HP0-Y12 certification HP0-Y12
NO.2 You will connect an IP telephone that supports LLDP-MED to port 8 on a ProCurve Switch 3500yl.
Which configuration step will enable the switch to auto-configure the appropriate VLAN for the phone??
A. Enable LLDP-MED in the VLAN 1 configuration context.
B. Configure port 8 as a tagged member of a voice VLAN.
C. Enable LLDP-MED in the configuration context for a voice VLAN.
D. Define port 8 as an LLDP-MED port in the global configuration context.
Answer: B
certification HP HP0-Y12 HP0-Y12
NO.3 How many priority levels are specified by the IEEE 802.1p standard?
A. 4
B. 7
C. 8 D. 16
Answer: C
HP HP0-Y12 certification HP0-Y12 HP0-Y12
NO.4 What are the advantages of implementing IP routing technologies at the network edge? (Select two.)
A. provide per-user QoS
B. decrease the load on network core
C. eliminate the need for routing protocols
D. create smaller, localized broadcast domains
E. enhance support for default gateway redundancy
Answer: BD
HP examen certification HP0-Y12 HP0-Y12 examen
NO.5 When does an LLDP-enabled switch start sending LLDP advertisements?
A. when QoS is enabled
B. when IP multicast is enabled
C. immediately after it has started
D. when it receives an LLDP request from a neighbor
Answer: C
HP HP0-Y12 HP0-Y12 examen HP0-Y12
NO.6 What is the difference between administrative distance and cost?
A. Administrative distance is applied only to routes learned through OSPF. Cost applies to RIP routes as
well as OSPF routes.
B. Administrative distance indicates the distance to remote networks learned through routing protocols.
Cost applies static routes and directly connected networks.
C. Administrative distance is determined solely through interactions among routers that share a routing
protocol. Cost can be defined by the administrator of each router.
D. Administrative distance is a locally significant value that can be used to break ties between routes
learned from different sources. Cost is a cumulative metric that indicates the number of hops to a remote
network.
Answer: D
HP certification HP0-Y12 certification HP0-Y12 certification HP0-Y12
NO.7 What is an advantage of locating routing intelligence at the edge of an enterprise network instead of in
the core?
A. The edge-oriented strategy requires fewer VLANs and networks.
B. The edge-oriented strategy supports VRRP and other protocols for default gateway redundancy.
C. The edge-oriented strategy enables ACLs and other traffic filters to be applied before traffic traverses
any part of the network.
D. The edge-oriented strategy simplifies summarization because each router must support VLANs only
for directly connected users.
Answer: C
HP examen HP0-Y12 HP0-Y12 HP0-Y12
NO.8 What is a difference between voice traffic and video traffic?
A. Voice traffic is typically more difficult to route than streaming video traffic.
B. Voice traffic is typically more sensitive to delay than streaming video traffic.
C. Voice traffic is typically less sensitive to jitter than streaming video traffic.
D. Voice traffic is typically more bandwidth-intensive than streaming video traffic.
Answer: B
HP HP0-Y12 HP0-Y12 HP0-Y12 examen HP0-Y12 examen
NO.9 While analyzing network traffic, you notice that many packets have an 802.1p value of 0. On a
ProCurve switch with default QoS settings, what does this indicate?
A. No prioritization settings are in effect on the network.
B. The traffic will be mapped to the normal priority queue.
C. The network relies on Layer 3 classification technologies
D. The network is not using the default settings on ProCurve switches.
Answer: B
HP examen certification HP0-Y12 HP0-Y12 certification HP0-Y12
NO.10 You enter the following command at the CLI of a ProCurve Switch 3500yl:
3500.l(config)#ip route 22.0.0.0/8 172.16.100.100
However, when you enter show ip route to confirm your entry, no route to 22.0.0.0/8 appears in the route
table. Which
statement explains this condition?
A. The interface connected to 172.16.100.100 is down.
B. The switch has learned another route to 22.0.0.0/8 through OSPF.
C. The route table already includes a default route using 172.16.100.100.
D. The switch has not been configured with an IP address of 172.16.100.100.
Answer:A
HP HP0-Y12 HP0-Y12 examen HP0-Y12
NO.11 Under what condition does the IEEE 802.1p field provide end-to-end prioritization?
A. All switches can classify traffic based on DSCP.
B. Source and destination hosts are in the same VLAN.
C. The network is experiencing high levels of congestion.
D. All links in the path between source and destination are tagged.
Answer: D
HP certification HP0-Y12 HP0-Y12 examen HP0-Y12 certification HP0-Y12 certification HP0-Y12
NO.12 What is the effect when the following command is entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-111)#qos priority 2
A. Packets entering the switch through VLAN 111 will be forwarded with normal priority.
B. Packets entering the switch through VLAN 111 will be forwarded with lower than normal priority.
C. Packets entering the switch through VLAN 111 will be forwarded with higher than normal priority.
D. Packets entering the switch through VLAN 111 will retain the priority marker set by another device.
Answer: B
HP examen certification HP0-Y12 HP0-Y12 HP0-Y12 examen certification HP0-Y12
NO.13 When does a router use administrative distance to determine which route to include in its route table?
A. when the router learned about multiple routes with equal-cost paths to the same destination
B. when the router learned about multiple routes to the same destination from different sources using the
same routing protocol
C. when the router learned about multiple routes to the same destination from different routing protocols
or static configuration
D. when the router is configured with static routes to the same destination that specify the same cost but
different next hop router interfaces
Answer: C
HP HP0-Y12 HP0-Y12
NO.14 While analyzing network traffic using a port monitor on a ProCurve Switch 8212zl, you notice that
many packets have an 802.1p value of 1. If the switch has default QoS settings, what does this indicate?
A. The 8212zl has marked the traffic for low-priority forwarding.
B. The 8212zl has marked the traffic for high-priority forwarding.
C. Another device has marked the traffic for low-priority forwarding.
D. Another device has marked the traffic for high-priority forwarding.
Answer: C
HP examen HP0-Y12 certification HP0-Y12
NO.15 Why does network congestion often cause more network congestion?
A. RSVP routers allocate more bandwidth to UDP applications.
B. TCP applications request retransmission of dropped packets.
C. QoS settings require switches to retransmit all real-time traffic.
D. 802.1p priorities are ignored after congestion reaches a user-defined threshold.
Answer: B
HP HP0-Y12 HP0-Y12 examen
NO.16 Which condition is necessary to enable a group of networks to be auto-summarized by a ProCurve
Switch 3500yl?
A. The address ranges to be summarized must be within different OSPF areas.
B. The address ranges to be summarized must be within a classful network boundary.
C. The address ranges to be summarized must be directly connected to a neighbor router.
D. The address ranges to be summarized must be accessible through a neighbor router interface.
Answer: B
certification HP HP0-Y12 HP0-Y12 HP0-Y12
NO.17 You must determine if the default settings on ProCurve 5406zl switches will provide adequate QoS for
a multimedia training application. What must you learn about the application in order to make this
determination?
A. if it recognizes IGMP joins from receivers
B. if it uses TCP or UDP as a transport protocol
C. if it inserts Layer 2 or Layer 3 priority markers
D. if it supports Guaranteed Minimum Bandwidth
Answer: C
HP examen HP0-Y12 HP0-Y12 examen HP0-Y12 examen HP0-Y12
NO.18 You must configure QoS on a ProCurve Switch 8212zl in the core layer of a network. One interface on
the switch receives traffic that uses only Layer 3 markers to indicate priority. What must you do to enable
the switch to forward this traffic with correct priority?
A. Set the QoS trust level to the appropriate value.
B. Enable the appropriate interpretation of the IP ToS field.
C. Configure port-based priorities for all ports forwarding this traffic.
D. Configure custom IEEE 802.1p maps for all ports forwarding this traffic.
Answer: B
HP HP0-Y12 examen HP0-Y12 HP0-Y12
NO.19 By default, what type of route is redistributed in RIP updates by ProCurve ProVision ASIC switches?
A. static
B. default
C. OSPF
D. connected
Answer: D
HP HP0-Y12 examen HP0-Y12 HP0-Y12 certification HP0-Y12
NO.20 What is the role of an OSPF Area Border Router?
A. to connect multiple non-backbone areas
B. to connect a backbone area to non-backbone areas
C. to connect OSPF domains with domains that use other routing protocols
D. to connect a backbone area to the backbones of other OSPF routing domains
Answer: B
certification HP certification HP0-Y12 HP0-Y12 HP0-Y12 examen
Choisissez le Pass4Test, choisissez le succès de test HP HP0-Y12. Bonne chance à vous.
没有评论:
发表评论