Si vous voulez ne se soucier plus à passer le test IIA IIA-CIA-Part3, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test IIA IIA-CIA-Part3. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A IIA IIA-CIA-Part3 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
Est-ce que vous vous souciez encore de réussir le test IIA IIA-CIA-Part3? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Code d'Examen: IIA-CIA-Part3
Nom d'Examen: IIA (Certified Internal Auditor - Part 3 study guide with online review)
Questions et réponses: 1554 Q&As
IIA-CIA-Part3 Démo gratuit à télécharger: http://www.pass4test.fr/IIA-CIA-Part3.html
NO.1 Which of the following is not required by ISO 9000 standards?
A. Establishment of a quality management system.
B. Creation of an internal audit system.
C. Consistent high quality products.
D. Onsite inspections by a registrar.
Answer: C
IIA IIA-CIA-Part3 examen certification IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
ISO 9000 is a set of generic standards for establishing and maintaining a quality system within an
entity. The standards provide no basis forjudging the quality of the end product. The marketplace
makes this determination. The objective of ISO 9000 standards is to ensure consistent quality.
NO.2 In which of the following organizational structures does total quality management (TQM) work
best?
A. Hierarchal.
B. Teams of people from the same specialty.
C. Teams of people from different specialties.
D. Specialists working individually.
Answer: C
certification IIA certification IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3 examen
Explanation:
TQM advocates replacement of the traditional hierarchal structure with teams of people from
different specialties. This change follows from TQM's emphasis on empowering employees and
teamwork. Employees should (1) have proper training, necessary information, and the best tools;
(2) be fully engaged in the decision process; and (3) receive fair compensation. If such empowered
employees are assembled in teams of individuals with the required skills, TQM theorists believe
they will be more effective than people performing their tasks separately in a rigid structure.
NO.3 A company with many branch stores has decided to use its best-performing store as a
benchmark organization for the purpose of analyzing the accuracy and reliability of branch store
financial reporting.
Which one of the following is the most likely measure to be included in a financial benchmark?
A. High turnover of employees.
B. High level of employee participation in setting budgets.
C. High amount of bad debt write-offs.
D. High number of suppliers.
Answer: C
certification IIA IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
Internal benchmarking is the application of best practices in one part of the organization (e.g., a
high-performing branch store) to its other parts (other branches). This process requires, among
other things, use of quantitative and qualitative measures. A key indicator for financial performance
measurement is the amount of bad debt write-offs. A high level of bad debt write-offs could
indicate fraud, which would compromise the accuracy and reliability of financial reports. Bad debt
write-offs may result from recording fictitious sales.
NO.4 A traditional quality control process in manufacturing consists of mass inspection of goods
only at the end of a production process. A major deficiency of the traditional control process is that:
A. It is expensive to do the inspections at the end of the process.
B. It is not possible to rework defective items.
C. It is not 100% effective.
D. It does not focus on improving the entire production process.
Answer: A
certification IIA IIA-CIA-Part3 examen IIA-CIA-Part3 certification IIA-CIA-Part3 IIA-CIA-Part3 examen
Explanation:
The process used to produce the goods is not thoroughly reviewed and evaluated for efficiency and
effectiveness. Preventing defects and increasing efficiency by improving the production process
raises quality standards and decreases costs.
NO.5 All of the following are generally included in a cost-of-quality report except:
A. Warranty claims.
B. Design engineering.
C. Supplier evaluations.
D. Lost contribution margin.
Answer: D
IIA examen IIA-CIA-Part3 examen certification IIA-CIA-Part3
Explanation:
A cost-of-quality report includes most costs related to quality, specifically the costs of prevention,
appraisal, internal failure, and external failure.
11. Which of the following is not an appropriate measure of quality?
A. Market share.
B. Delivery performance.
C. Customer satisfaction.
D. Raw materials costs.
Answer: D
IIA certification IIA-CIA-Part3 IIA-CIA-Part3 examen IIA-CIA-Part3 examen
Explanation:
Emphasizing lower input costs may result in more defective output, and higher input costs may or
may not reflect the procurement of better raw materials. Financial measures are thus mostly
unsuitable for measuring quality.
12. One of the main reasons that implementation of a total quality management (TQM) program
works better through the use of teams is:
A. Teams are more efficient and help an organization reduce its staffing.
B. Employee motivation is always higher for team members than for individual contributors.
C. Teams are a natural vehicle for sharing ideas, which leads to process improvement.
D. The use of teams eliminates the need for supervision, thereby allowing a company to reduce
staffing.
Answer: C
certification IIA IIA-CIA-Part3 IIA-CIA-Part3 certification IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
TQM promotes teamwork by modifying or eliminating traditional (and rigid) vertical hierarchies and
instead forming flexible groups of specialists. Quality circles, cross-functional teams, and
self-managed teams are typical formats. Teams are an excellent means of encouraging the sharing
of ideas and removing process improvement obstacles.
13. If a company is customer-centered, its customers are defined as:
A. Only people external to the company who have purchased something from the company.
B. Only people internal to the company who directly use its product.
C. Anyone external to the company and those internal who rely on its product to get their job done.
D. Everybody external to the company who is currently doing, or may in the future do, business with
the company.
Answer: C
certification IIA IIA-CIA-Part3 IIA-CIA-Part3 examen IIA-CIA-Part3
Explanation:
One of the principles of total quality management (TQM) is customer orientation, whether the
customer is internal or external. An internal customer is a member of the organization who relies on
another member's work to accomplish his/her task.
14. Management of a company is attempting to build a reputation as a world-class manufacturer
of quality products. Which of the following measures would not be used by the firm to measure
quality?
A. The percentage of shipments returned by customers because of poor quality.
B. The number of parts shipped per day.
C. The number of defective parts per million.
D. The percentage of products passing quality tests the firsttime
Answer: B
certification IIA certification IIA-CIA-Part3 IIA-CIA-Part3 examen IIA-CIA-Part3 IIA-CIA-Part3 certification IIA-CIA-Part3
Explanation:
The number of parts shipped per day would most likely be used as a measure of the effectiveness
and efficiency of shipping procedures, not the quality of the product. This measure does not
consider how many of the parts are defective.
15. Quality costing is similar in service and manufacturing organizations. Nevertheless, the
differences
between these organizations have certain implications for quality management. Thus,
A. Direct labor costs are usually a higher percentage of total costs in manufacturing organizations.
B. External failure costs are relatively greater in service organizations.
C. Quality improvements resulting in more efficient use of labor time are more likely to be accepted
by employees in service organizations.
D. Poor service is less likely to result in loss of customers than a faulty product.
Answer: B
IIA examen IIA-CIA-Part3 examen IIA-CIA-Part3
Explanation:
External failure costs arise when problems occur after delivery. They occur because products or
services are nonconforming or otherwise do not satisfy customers. External failure costs in service
enterprises are even more important than in manufacturing environments. Faulty goods sometimes
maybe reworked or replaced to a customer's satisfaction, but poor service tends to result in a loss of
customers.
16. A means of limiting production delays caused by equipment breakdown and repair is to:
A. Schedule production based on capacity planning.
B. Plan maintenance activity based on an analysis of equipment repair work orders.
C. Pre-authorize equipment maintenance and overtime pay.
D. Establish a preventive maintenance program for all production equipment.
Answer: D
certification IIA certification IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
A preventive maintenance program reduces equipment breakdowns and repairs.
17. Under a total quality management (TQM) approach,
A. Measurement occurs throughout the process, and errors are caught and corrected at the source.
B. Quality control is performed by highly trained inspectors at the end of the production process.
C. Upper management assumes the primary responsibility for the quality of the products and
services.
D. A large number of suppliers are used in order to obtain the lowest possible prices.
Answer: A
IIA IIA-CIA-Part3 certification IIA-CIA-Part3
Explanation:
TQM emphasizes quality as a basic organizational function. TQM is the continuous pursuit of quality
in every aspect of organizational activities. One of the basic principles of TQM is doing it right the
first time. Thus, errors should be caught and corrected at the source.
18. Which of the following is a key to successful total quality management (TQM)?
A. Training quality inspectors.
B. Focusing intensely on the customer.
C. Creating appropriate hierarchies to increase efficiency.
D. Establishing a well-defined quality standard, then focusing on meeting it.
Answer: B
certification IIA certification IIA-CIA-Part3 IIA-CIA-Part3 examen IIA-CIA-Part3 examen certification IIA-CIA-Part3
Explanation:
TQM emphasizes satisfaction of customers, both internal and external. TQM considers the supplier's
relationship with the customer, identifies customer needs, and recognizes that everyone in a
process is at some time a customer or supplier of someone else, either inside or outside of the
organization. Thus, TQM begins with external customer requirements, identifies internal
customer-supplier relationships and requirements, and establishes requirements for external
suppliers.
19. The four categories of costs associated with product quality costs are:
A. External failure, internal failure, prevention, and carrying.
B. External failure, internal failure, prevention, and appraisal.
C. External failure, internal failure, training, and appraisal.
D. Warranty, product liability, training, and appraisal.
Answer: B
IIA IIA-CIA-Part3 examen IIA-CIA-Part3 certification IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
Prevention costs are incurred to prevent defects. Appraisal costs are incurred to detect defective
output during and after the production process. Internal failure costs are associated with defective
output discovered before shipping. External failure costs are associated with defective output
discovered after it has reached the customer.
20. Statistical quality control often involves the use of control charts whose basic purpose is to:
A. Determine when accounting control procedures are not working.
B. Control labor costs in production operations.
C. Detect performance trends away from normal operations.
D. Monitor internal control applications of information technology.
Answer: C
IIA IIA-CIA-Part3 examen certification IIA-CIA-Part3 certification IIA-CIA-Part3 certification IIA-CIA-Part3
Explanation:
Statistical control charts are graphic aids for monitoring the status of any process subject to random
variations. The chart consists of three horizontal lines plotted on a horizontal time scale. The vertical
scale represents the appropriate quantitative measure. The center line represents the average range
or overall mean for the process being controlled. The other two lines are the upper control limit and
the lower control limit. The processes are measured periodically, and the values are plotted on the
chart. If the value falls within the control limits, no action is taken. If the value falls outside the limits,
the process is considered "out of control," and an investigation is made for possible corrective
action. Another advantage of the chart is that it makes trends visible.
NO.6 Which of the following costs of quality is a failure cost?
A. Systems development costs.
B. Costs of inspecting in-process items.
C. Contract penalty for delivery of nonconforming goods.
D. Costs of quality circles.
Answer: C
certification IIA IIA-CIA-Part3 IIA-CIA-Part3 examen IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
Failure costs are incurred after defective output has been removed from production. A contract
penalty for faulty goods is an example of an external failure cost.
NO.7 Which statement best describes total quality management (TQM)?
A. TQM emphasizes reducing the cost of inspection.
B. TQM emphasizes better statistical quality control techniques.
C. TQM emphasizes doing each job right the first time.
D. TQM emphasizes encouraging cross-functional teamwork.
Answer: C
IIA certification IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
TQM establishes quality as an organizational objective and views it as a major component of the
organization's service to its customers. It emphasizes employee training and commitment,
productservice design and production, and customer service. Ordinarily, the quality of a product or
service is as important to customers as cost and timeliness. Superior product quality is not merely
the result of more inspection, better statistical quality control, and cross-functional teamwork.
Manufactures must make fundamental changes in the way they produce products and do each job
right the first time.
NO.8 Focusing on customers, promoting innovation, learning new philosophies, driving out fear, and
providing extensive training are all elements of a major change in organizations. These elements are
aimed primarily at:
A. Copying leading organizations to better compete with them.
B. Focusing on the total quality of products and services.
C. Being efficient and effective at the same time, in order to indirectly affect profits.
D. Managing costs of products and services better, in order to become the low-cost provider.
Answer: B
IIA IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3 examen
Explanation:
TQM is a comprehensive approach to quality. It treats the pursuit of quality as a basic organizational
function that is as important as production or marketing. TQM is the continuous pursuit of quality in
every aspect of organizational activities through (1) a philosophy of doing it right the first time; (2)
employee training and empowerment; (3) promotion of teamwork; (4) improvement of processes;
and (5) attention to satisfaction of customers, both internal and external. TQM emphasizes the
supplier's relationship with the customer, identifies customer needs, and recognizes that everyone
in a process is at some time a customer or supplier of someone else, either inside or outside of the
organization.
NO.9 The use of teams in total quality management (TQM) is important because:
A. Well-managed teams can be highly creative and are able to address complex problems better
than individuals can.
B. Teams are quicker to make decisions, thereby helping to reduce cycle time.
C. Employee motivation is higher for team members than for individual contributors.
D. The use of teams eliminates the need for supervision, thereby allowing a company to become
leaner and more profitable.
Answer: A
IIA IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3 examen
Explanation:
Teams can use the diverse knowledge and skills of all team members. Employee involvement means
training and empowering employees to harness their creativity for problem solving. Quality control
circles are used to obtain input from employees and to locate the best perspective on problem
solving.
NO.10 Which of the following is a characteristic of total quality management (TQM)?
A. Management by objectives.
B. On-the-job training by other workers.
C. Quality by final inspection.
D. Education and self-improvement.
Answer: D
IIA IIA-CIA-Part3 IIA-CIA-Part3 examen IIA-CIA-Part3
Explanation:
TQM is the continuous pursuit of quality in every aspect of organizational activities. One of the
means of achieving this is through employee training and empowerment.
Passer le test IIA IIA-CIA-Part3, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification IIA IIA-CIA-Part3. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification IIA IIA-CIA-Part3.
没有评论:
发表评论