Vous allez choisir Pass4Test après essayer une partie de Q&A CA CAT-100 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification CA CAT-100.
Le test CA CAT-100 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test CA CAT-100 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat CA CAT-100 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test CA CAT-100 avec l'aide de Pass4Test.
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A CA CAT-100. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test CA CAT-100 sans aucune doute.
Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification CA CAT-100 via son guide d'étude. Est-ce que vous vous souciez de test Certification CA CAT-100? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.
Le test simulation CA CAT-100 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test CA CAT-100 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
Code d'Examen: CAT-100
Nom d'Examen: CA (CA Application Performance Management Professional Exam )
Questions et réponses: 40 Q&As
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test CA CAT-100 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
CAT-100 Démo gratuit à télécharger: http://www.pass4test.fr/CAT-100.html
NO.1 While viewing Investigator, you notice that metric values are acceptable, but you want to determine
whether there are any outlying Servlet Response Times exceeding threshold limits. Which Workstation
feature enables you to do this?
A. Metric data
B. Boundary Blame
C. View Historical Data
D. Minimum and Maximum Metric values
Answer: D
CA examen CAT-100 examen CAT-100
NO.2 In CA Customer Experience Manager (CA CEM), the name of the file used for local authentication is:
A. users.xml
B. passwd.xml
C. security.xml
D. authenticate.xml
Answer: B
CA CAT-100 certification CAT-100
NO.3 What must you configure for the Transaction Impact Monitor (TIM) to see network traffic sent by a web
server?
A. A full transaction
B. The monitor interface
C. The IP address of the web server
D. The requesting user s login credentials
Answer: A
CA certification CAT-100 CAT-100 certification CAT-100
NO.4 A summary alert notification includes: (Choose three)
A. time stamps
B. transaction traces
C. a summary alert name
D. the current state of the summary alert
E. details of the user-defined time period for checking the current state of each underlying simple alert
Answer: B,C,E
CA examen CAT-100 CAT-100 examen CAT-100 CAT-100 examen
NO.5 Which step do you need to perform before you install CA Introscope ChangeDetector?
A. Stop all Enterprise Managers in your system.
B. Verify that you are using CA Introscope 9.0 or newer.
C. Set the ChangeDetector properties in IntroscopeAgent.profile.
D. Identify the <agent_home>, <Introscope_home>, and <Workstation_home> directories for CA
Introscope.
Answer: D
certification CA CAT-100 CAT-100 CAT-100
NO.6 Which statement about tracer groups is TRUE?
A. They are defined in XML files.
B. You can activate component tracing at the class level only.
C. After you activate component tracing, you need to restart the Enterprise Manager.
D. Agent performance can be improved by modifying the default metric set to monitor only the necessary
classes.
Answer: D
CA CAT-100 CAT-100 certification CAT-100
NO.7 CA Introscopy holds historical data in multiple tiers. What is a characteristic of data held in Tier 1?
A. Is used in reporting
B. Is used for incident analysis
C. Is used in capacity planning
D. Is older and configured for lower resolutions
Answer: B
CA examen CAT-100 examen CAT-100
NO.8 You can configure CA Introscope ErrorDetector to ignore certain errors by editing which file?
A. errors.pbd
B. ErrorDetector.profile
C. IntroscopeAgent.profile
D. IntroscopeEnterpriseManager.profile
Answer: A
CA CAT-100 CAT-100 CAT-100 examen CAT-100
NO.9 Which statements about HTTP sessions are TRUE? (Choose two)
A. Only large objects, such as shopping carts should be stored in the session object.
B. Each HTTPSession object has a parameter that you can set to specify the session timeout value.
C. If users do not log out of the HTTP session, the object remains in memory until a timeout is reached.
D. Data structures created to support HTTP sessions cannot be reclaimed by the garbage collector (GC).
Answer: B,C
CA CAT-100 CAT-100
NO.10 What is the name of the .jar file containing the CLW.?
A. CLW.jar
B. CLWorkstation.jar
C. CommandLine.jar
D. CommandLineWorkstation.jar
Answer: B
certification CA CAT-100 examen CAT-100 examen certification CAT-100 CAT-100
NO.11 Which file should you create to change certain default CA Customer Experience Manager (CA CEM)
settings, such as baseline duration?
A. Web.xml
B. TESS -default. Properties
C. EM-baseline.properties
D. TESS-customer.properties
Answer: A
certification CA CAT-100 CAT-100 CAT-100 examen
NO.12 Which statement about the Historical Query Viewer is TRUE?
A. It can be used to view errors from a command line.
B. It is a web-based alternative to the Live Error Viewer.
C. It can be used to open XML files containing error data.
D. It is a free open source utility that users without CA Introscope can use to view error data produced by
CA Introscope.
Answer: C
CA examen certification CAT-100 CAT-100 CAT-100 examen CAT-100 examen CAT-100
NO.13 Which metrics are MOST suitable for building alerts? (Choose three)
A. Stall Count
B. Errors Per Interval
C. Responses Per Interval
D. Concurrent Invocations
E. Average Response Time (ms)
Answer: A,B,E
CA CAT-100 examen CAT-100 examen
NO.14 Deleting a management module:
A. Removes the associated jar file from the operating system of the Enterprise Manager.
B. Does not remove the .jar file from the operating system of the Enterprise Manager and makes no
changes to the file.
C. Does not remove the .jar file from the operating system of the Enterprise Manager, but copies it to a
folder named MM_old.
D. Does not remove the .jar file from the operating system of the Enterprise Manager, but renames it by
appending the suffix?.inactive?.
Answer: A
certification CA certification CAT-100 certification CAT-100 CAT-100 examen
NO.15 When default metrics are generated during application execution, the probes:
A. Retain data until agents collect it.
B. Report data directly to the Enterprise Manager.
C. Report data to agents, which in turn pass it to the Enterprise Manager.
D. Report data to agents, which retain it until the Enterprise Manager collects it.
Answer: C
certification CA CAT-100 CAT-100 examen certification CAT-100 CAT-100 certification CAT-100
NO.16 A group of business transactions in a CA Customer Experience Manager (CA CEM) domain is known as
a:
A. business service
B. business transaction
C. transaction parameter
D. transaction component
Answer: A
CA certification CAT-100 CAT-100 examen CAT-100 examen CAT-100 examen
NO.17 What is a characteristic of the CA Introscope boundary blame feature?
A. Boundary blame is disabled by default.
B. Disabling Boundary blame in an agent will generate fewer metrics than an agent with boundary blame
enabled.
C. The boundary blame metric tree provides visibility to each component in the stack, showing a called
component for every calling component.
D. Boundary blame gives visibility into the front-end components and the back-end component with all
components between these two not in the blame stack.
Answer: D
CA CAT-100 examen certification CAT-100 CAT-100 CAT-100 examen CAT-100
NO.18 CA Introscope ChangeDetector configuration properties are stored in: A. Change-detector.xml
B. IntroscopeAgent.properties
C. ChangeDetector-config.xml
D. ChangeDetector-properties.xml
Answer: C
CA CAT-100 examen certification CAT-100 CAT-100 CAT-100
NO.19 Which graph displays the most information within a single view?
A. Dashboard
B. Box-Whisker
C. Defect Pareto
D. Standard Deviation
Answer: B
CA CAT-100 certification CAT-100 certification CAT-100
NO.20 You need an instruction in your Probe Builder Directive (PBD) to skip monitoring of all get() methods in
a given Tracer Group. Which command will do this?
A. SkipClass
B. SkipClassForFlag
C. SkipMethodForFlag
D. SkipMethodForClass
Answer: A
certification CA certification CAT-100 CAT-100 examen CAT-100 CAT-100
NO.21 You are viewing a dashboard that displays data from 10 different Agents. You want to isolate and view
data from three Agents, which you suspect may be affected by a problem. What must you do to enable
this?
A. Activate the Console Lens feature
B. Activate the Historical Query feature and select multiple time periods
C. Select the Show Module and Domain names with Dashboard Name option
D. Create multiple copies of Dashboards, each one designed to show data from a different Agent
Answer: A
certification CA CAT-100 CAT-100 examen
NO.22 An element that is a logical grouping of metrics treated as a single element is known as a:
A. Report
B. Calculator
C. Dashboard
D. Metric Grouping
Answer: D
CA examen CAT-100 CAT-100 CAT-100 examen
NO.23 In the process that defines how the default metrics are generated in CA Introscope, what occurs after
an Agent obtains a list of applicable ProbeBuilder Directive (PBD) files from the IntroscopeAgent.profile
file and parses their directives?
A. The Agent collects performance and execution data.
B. The Probes report performance and execution data to the Agent.
C. The Agent reports Metrics over the network to the Enterprise Manager.
D. The Agent inserts Probes into the Java or .NET classes based on the instructions found in the PBD
files.
Answer: B
CA examen certification CAT-100 certification CAT-100 CAT-100
NO.24 You want to configure the list of keys that identify URL Groups in this agent. Which configuration
parameter will enable you to do this?
A. introscope.agent.urlgroup.keys
B. introscope.autoprobe.directivesFile
C. introscope.agent.urlgroup.group.<key>.format
D. introscope.agent.urlgroup.group.<key>.pathprefix
Answer: D
CA CAT-100 CAT-100 examen
NO.25 Each element in a report template maps to a single:
A. Metric
B. PDF file
C. Dashboard
D. Metric grouping
Answer: A
CA examen CAT-100 examen certification CAT-100 CAT-100
NO.26 Which type of file stores all items contained in a management module?
A. Zip
B. Package (PKG)
C. Java Archive (JAR)
D. Tape archive (TAR)
Answer: C
CA CAT-100 CAT-100 CAT-100
NO.27 The preferred scripting language for developing Environment Performance Agent (EPA) plugins is:
A. Perl
B. Python
C. JavaScript
D. Shell script
Answer: C
CA CAT-100 CAT-100 certification CAT-100 CAT-100 CAT-100
NO.28 What is the Metric name in this Metric path?
H04|VVAS_Node|Server 0|Servlets|SeatServlet:Stall Count
A. H04
B. Servlets
C. Stall Count
D. WAS_Node
Answer: C
CA certification CAT-100 CAT-100 examen CAT-100 CAT-100
NO.29 Which metric type measures the number of incomplete requests during a time interval?
A. Stall Count
B. Instance counts
C. Errors Per Interval
D. Concurrent Invocations
Answer: D
CA certification CAT-100 CAT-100 CAT-100 examen
NO.30 In the Dashboard Editor, the palette consists of static content tools and:
A. Data viewers
B. View creators
C. Data view creators
D. Dynamic content tools
Answer: A
certification CA CAT-100 CAT-100 CAT-100 CAT-100 CAT-100 examen
NO.31 You have decided that it is unnecessary to show socket-level metrics in your system and want to
disable the SocketTracing tracer group. Which command will enable you to do this?
A. TurnOff: SocketTracing
B. //TurnOn: SocketTracing
C. --TurnOn: SocketTracing
D. #TurnOn: SocketTracing
Answer: D
CA examen CAT-100 CAT-100 CAT-100 examen CAT-100 examen
NO.32 When you create metric groupings in the Investigator, you specify the data you want the metric
grouping to display, using regular expression language from Perl 5 in the metric grouping Agent
Expressions and Metric Expressions fields. A fully qualified metric name of a metric in a Resource looks
like this:
Acme|c1737019-a|AcmeUSA|AcmeWest|GC Heap:BytesIn Use
In this example, what does AcmeWest represent?
A. Domain
B. Process
C. Resource
D. Agent name
Answer: D
CA examen certification CAT-100 CAT-100 CAT-100 examen
NO.33 Summary alert S is made up of single alerts 1, 2, and 3. Currently, the states of the alerts are as
follows: Alert 1: caution
Alert 2: caution
Alert 3: danger
What is the color of alert S?
A. Red
B. White
C. Green
D. Yellow
Answer: A
CA certification CAT-100 CAT-100 CAT-100
NO.34 CA Introscope collects performance data from applications in a Java Virtual Machine (JVM) or .NET
Common Language Runtime (CLR). Which feature of the CA Introscope architecture is responsible for
collecting this data?
A. Agent
B. Enterprise Manager
C. Command Line Workstation
D. Environment Performance Agent (EPA)
Answer: A
CA CAT-100 examen CAT-100 CAT-100
NO.35 Which information can you view using the Summary View tab of the CA Introscope Transaction Tracer?
(Choose three)
A. Color codes, which indicate call durations
B. The number of times a URL was accessed
C. The number of milliseconds to complete the call
D. The number of milliseconds required for the fastest call completion
E. The number of transaction components affected, shown using a hierarchical format
Answer: B,C,D
CA certification CAT-100 certification CAT-100 CAT-100 examen CAT-100 examen
NO.36 Significant changes were introduced for CA Customer Experience Manager (CA CEM) version 5.0. A
new CA CEM server deployment model is:
A. software only
B. v5.0 appliance only
C. legacy appliance only
D. virtual appliance only
Answer: A
CA CAT-100 CAT-100 certification CAT-100 CAT-100
NO.37 You want to set up CA Introscopy so that users are always using the most up-to-date version of the
client. Which mechanism enables you to do this?
A. WebView
B. Workstation
C. Transaction Tracer
D. Web Start Workstation
Answer: D
CA examen CAT-100 CAT-100 examen CAT-100 examen
NO.38 For reporting purposes, data from Transaction Impact Monitors (TIMs) is aggregated daily. By default,
this occurs at:
A. noon
B. 9:00 AM
C. 3:00 AM
D. midnight
Answer: D
CA CAT-100 CAT-100 CAT-100
NO.39 If you want to limit an Event Database search to error events only, which query should you use?
A. type:normal
B. type:sampled
C. type:errorsnapshot
D. type:whatsinteresting
Answer: C
CA CAT-100 certification CAT-100 certification CAT-100 CAT-100 certification CAT-100
NO.40 CA Customer Experience Manager (CA CEM) records specific client transactions and never stores
private parameters. An example of a private parameter is a:
A. Password
B. client name
C. transaction name
D. transaction signature
Answer: A
certification CA CAT-100 certification CAT-100 certification CAT-100 CAT-100 CAT-100
Pass4Test est un bon site d'offrir la facilité aux candidats de test CA CAT-100. Selon les anciens test, l'outil de formation CA CAT-100 est bien proche de test réel.
没有评论:
发表评论