Beaucoup de gens trouvent difficile à passer le test IBM C2040-925, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test IBM C2040-925 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test IBM C2180-605, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
La Q&A IBM C2180-605 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification IBM C2180-605.
Code d'Examen: C2040-925
Nom d'Examen: IBM (Installing and Configuring IBM Lotus Notes and Domino 8.5)
Questions et réponses: 111 Q&As
Code d'Examen: C2180-605
Nom d'Examen: IBM (IBM WebSphere Enterprise Service Bus V7.0,Integration Development)
Questions et réponses: 171 Q&As
Est-ce que vous vous souciez encore de réussir le test IBM C2040-925? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de IBM C2040-925 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
La population de la Certification IBM C2040-925 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
La Q&A de Pass4Test vise au test Certificat IBM C2180-605. L'outil de formation IBM C2180-605 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
C2180-605 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-605.html
NO.1 An integration developer is using serviceDeploy command to generate J2EE application EAR files
from SCA modules. The serviceDeploy command expects an input file in which of the following formats?
A. .gz
B. .jar
C. .rar
D. .tar
E. .zip
Answer: B,E
IBM examen certification C2180-605 certification C2180-605 certification C2180-605 certification C2180-605 C2180-605 examen
NO.2 A new version of a common business object currently defined in a shared library is required for a new
mediation module. Which of the following should be done to ensure that older modules are not
immediately affected by the change and both versions of the business object are available to all modules?
A. Create the new version of the business object using a different name in the shared library.
B. Create the new version of the business object using the same name in the new mediation module
without modifying the shared library or the other mediation modules.
C. Create the new version of the business object using a different name in the new mediation module
without modifying the shared library or the other mediation modules.
D. Move the old version of the common business object to each existing dependent mediation module,
then create the new version of the business object in the new mediation module.
Answer: A
IBM C2180-605 examen C2180-605 examen C2180-605 examen
NO.3 An integration developer has developed a new mediation flow and wants to test it on a new embedded
server profile. How should the integration developer proceed in order to perform this testing as efficiently
as possible?
A. Build the EAR file inWebSphere Integration Developer, then deploy it via serviceDeploy on the server.
B. Build the EAR file inWebSphere Integration Developer, then deploy it via the server's administrative
console.
C. In WebSphere Integration Developer, in the Servers tab, add a new server and enter the connection
details of the server.
D. InWebSphere Integration Developer, import the server via File>Import>Server and enter the
connection details of the server.
Answer: C
IBM examen certification C2180-605 C2180-605 examen C2180-605 examen
NO.4 An integration developer is designing an XML map that combines the firstName and lastName
elements of the source into a single fullName element in the target. In addition, the fullName element
must be formatted with the lastName first, followed by a comma and then the firstName.
Which transform type would be the most appropriate for this situation?
A. Move
B. Concat
C. Append
D. Assign
Answer: B
certification IBM certification C2180-605 certification C2180-605 certification C2180-605
NO.5 A PurchaseOrder business object and a SalesOrder business object inherit from an abstract Order
business object. Both PurchaseOrder and SalesOrder objects require an orderDate property.
However, PurchaseOrder requires an orderType property that is not required by SalesOrder. What is the
BEST way to model the objects?
A. Define theorderDate property in the abstract Order
Define the orderType property in PurchaseOrder
B. Define theorderDate property in the abstract Order
Define the orderType property in the abstract Order
C. Define theorderDate property in PurchaseOrder and SalesOrder
Define the orderType property in PurchaseOrder
D. Define theorderDate property in PurchaseOrder and SalesOrder
Define the orderType property in the abstract Order
Answer: A
IBM examen C2180-605 examen certification C2180-605
NO.6 Refer to the Exhibits.
An integration developer needs to implement an application to manage the reception of resumes for a job
application. The application must allow the applicant to attach a photo in jpeg format. The integration
developer decides to create a mediation module exposed through a Web Service Export binding using
SOAP with Referenced Attachments to save the photo to a database and send the rest of the data to a
business process for further processing. Exhibit A shows the assembly diagram of the mediation module.
Exhibit B shows the interface of the Export component of the mediation module in the interface editor.
Which actions does the integration developer need to execute in the interface editor above, in order to
correctly configure the Web Service Export binding to handle SOAP with Referenced Attachments?
A. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to
'base64Binary'.A.Leave the binding style to 'document literal wrapped', change the 'attachment' input type
to 'base64Binary'.
B. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
C. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
D. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
E. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary'.C.Change the binding style to 'document literal non wrapped', change the 'attachment' input
type to 'hexBinary'.
F. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
G. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
H. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
Answer: F,G,H
IBM C2180-605 examen certification C2180-605 C2180-605 C2180-605 examen
NO.7 An integration developer is developing a mediation flow component to integrate PeopleSoft Enterprise.
The integration developer has identified WebSphere Adapter for PeopleSoft Enterprise for this integration.
Which technology specification is implemented by this adapter?
A. Java EE Connector Architecture (JCA)
B. Java EE Component Architecture (JCA)
C. Java EE Connectivity Architecture (JCA)
D. Java EE Communication Architecture (JCA)
Answer: A
certification IBM C2180-605 examen certification C2180-605 certification C2180-605
NO.8 An integration developer has been tasked to develop a mediation module that integrates a legacy J2EE
application deployed on a remote server. The legacy application is exposed through an EJB facade and
the integration developer decides to use an EJB import. What is the most suitable approach to configure it?
The integration developer should:
A. add the corresponding EJB client project to the module dependencies and select the EJB local
interface for the import.
B. import the corresponding EJB client project into the workspace and select the EJB remote interface for
the import.
C. create a WSDL interface with the same operations as the EJB interface, select it as the import interface
and add the EJB JNDI Name in the binding section.
D. use the external service wizard to point to the EJB through its IIOP URL and the wizard
automatically creates the interface and the business objects for the import.
Answer: B
IBM examen C2180-605 certification C2180-605 C2180-605 examen C2180-605 examen
没有评论:
发表评论