C'est sûr que le Certificat IBM C4040-121 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test IBM C4040-121, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat IBM C4040-121 peut bien tester la professionnalité de IT.
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Vous pouvez tout d'abord télécharger le démo IBM C4040-121 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.
Code d'Examen: C4040-121
Nom d'Examen: IBM (Virtualization Technical Support for IBM i -v1)
Questions et réponses: 102 Q&As
Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test IBM C4040-121 et passer le test à la première fois.
C4040-121 Démo gratuit à télécharger: http://www.pass4test.fr/C4040-121.html
NO.1 Disk from a fibre-attached V7000 disk subsystem will be used for an IBM i partition. What type
of adapter is required in the IBM i partition?
A. SAS disk adapter
B. Virtual SAS adapter
C. Virtual SCSI adapter
D. Fibre Channel adapter
Answer: C
IBM examen C4040-121 C4040-121 examen C4040-121 certification C4040-121
NO.2 A client IBM i 7.1 partition is being hosted by dual VIO Server partitions (VIOS-1 & VIOS-2). A
Shared Ethernet Adapter (SEA) has been created in order to provide Ethernet failover capability
for the IBM i partition. The IBM i partition will use the Ethernet resources of the VIO Server
partitions.
How many virtual Ethernet adapters need to be defined on the HMCI in the IBM i client, and VIO
Server partition profiles to support SEA and failover?
A. IBM i Client: 1 adapter:
VIOS-1: 1 adapter
VIOS-2: 1 adapter
B. IBM i Client: 2 adapters
VIOS-1: 1 adapter
VIOS-2: 1 adapter
C. IBM i Client: 1 adapter
VIOS-1: 2 adapters
VIOS-2: 2 adapters
D. IBM i Client: 2 adapters
VIOS-1: 2 adapters
VIOS-2: 2 adapters
Answer: C
IBM examen C4040-121 C4040-121 examen C4040-121 examen certification C4040-121 certification C4040-121
NO.3 A customer needs two client IBM i partitions on a 4-core Power 720, with storage hosted by
VIO Server. What is the least expensive method to manage this environment?
A. HMC
B. Virtual Partition Manager
C. Integrated Virtualization Manager
D. Systems Director Navigator for PowerVM
Answer: C
IBM certification C4040-121 C4040-121 examen certification C4040-121
NO.4 A customer wants two VIO Servers in the CEO of a proposed Power 720. To provide redundancy
for the IBM V7000 SAN they will utilize to provision disk for his client partitions.
What is the minimum required to make this possible?
A. A 6-disk storage backplane
B. An 8-disk storage backplane
C. A 6-disk storage backplane and the split drive bay feature
D. An 8-disk storage backplane and the split drive bay feature
Answer: C
certification IBM certification C4040-121 C4040-121
NO.5 A customer has multiple POWERS 570 servers. The servers are controlled by multiple HMCs.
The customer is installing an additional Power 770 server in this environment but will retain their
existing HMCs. No updates to FSP or HMC levels have been made since installation of the
POWERS servers.
After reviewing the cover letters for ESP and HMC firmware levels, what updates are required to
support the addition of the new server into the network?
A. Update only the HMCs to the latest version.
B. Update only the FSPs to the latest release available.
C. Update the FSP5 and HMC5 of the existing systems to the minimum level required.
D. Update the POWERS ESPs to the most recent version available for the installed firmware
release. Update the HMCs to the most recent release available.
Answer: C
IBM examen certification C4040-121 C4040-121 C4040-121 examen
NO.6 An administrator wants to share a fibre attached TS3100 tape library between multiple IBM i7.1
partitions. The system contains a PC #5774 - 4Gb fibre adapter and uses an IBM fibre switch. All
IBM i partitions are hosted by VIO Server (VIOS).
How could the administrator configure the sharing of the tape library?
A. Configure NPIV within VIOS, then configure each partition to use NPIV to share the tape library.
B. Create a script that can be called after each backup job in a partition finishes, which will move
the fibre adapter to the next partition
C. In the HMC, select the host Power System, then select Operations - Schedule Operations -
New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter
between partitions.
D. In the HMC, select the VIOS partition, then select Operations - Schedule Operations - Options -
New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter
between partitions.
Answer: B
IBM examen C4040-121 C4040-121 examen certification C4040-121 C4040-121 examen
NO.7 A customer has purchased a new BladeCenter H (BCH) and POWER blade to run IBM i. The
POWER blade is configured with two Fibre Channel interlaces for attaching SAN and tape.
They have an IBM TS3500 tape library with a fibre channel connection, and current firmware is
running through a fibre switch to another IBM i system. One port on the existing switch and one
port in the BCH fibre switch has been zoned to provide a connection from the tape library to the
BCH.
After IBM i 7.1 SLIC and base OS are installed on the blade from IBM distribution media, the tape
library does not appear in the device configuration.
What is the most likely cause of the problem?
A. The existing switch does not support NPIV.
B. NPIV enablement was omitted when configuring the BCH switch.
C. The BCH switch configuration must match the link speed of the TS3500.
D. A switch-to-switch cable is required. A switch to device cable was shipped with the BCH by default.
Answer: A
IBM examen C4040-121 examen C4040-121
NO.8 In addition to Qshell and PASE, what other product needs to be installed on an IBM i partition
in order to remotely run scripts on an HMC?
A. IBM Portable Utilities for i
B. IBM i Integrated Server Support
C. IBM Cryptographic Service Provider
D. IBM Network Authentication Enablement for i
Answer: A
IBM examen C4040-121 C4040-121 examen C4040-121
Est-ce que vous vous souciez encore de réussir le test IBM C4040-121? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
没有评论:
发表评论