Le test IBM 000-255 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test IBM 000-255 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat IBM 000-255 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test IBM 000-255 avec l'aide de Pass4Test.
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification IBM A2180-376. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Pass4Test est un catalyseur de votre succès de test IBM 000-255. En visant la Certification de IBM, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test IBM 000-255, la Q&A IBM 000-255 est un bon choix pour vous.
Code d'Examen: 000-255
Nom d'Examen: IBM (Dev.wwIBM Rational appdev-Websphere software v6)
Questions et réponses: 110 Q&As
Code d'Examen: C2090-735
Nom d'Examen: IBM (DB2 9.5 SQL Procedure Developer)
Questions et réponses: 99 Q&As
Code d'Examen: A2180-376
Nom d'Examen: IBM (Assessment: IBM WebSphere MQ V7.0, Solution Design)
Questions et réponses: 98 Q&As
Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test IBM A2180-376 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test IBM A2180-376, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
A2180-376 Démo gratuit à télécharger: http://www.pass4test.fr/A2180-376.html
NO.1 There are multiple instances of a cluster queue. Which of the following is
recommended practice for the
default binding (DEFBIND) parameter?
A. Allow the local WebSphere MQ administrators to define default binding as they think best
for each
instance of the queue.
B. Require the WebSphere MQ administrators to set default binding to the same value for all
instances of
the queue in the cluster.
C. The solution designer should consult with the development team and local WebSphere
MQ
administrator to determine how best to configure default binding of each queue manager.
D. The best option is to accept the default setting for default binding on each queue manager,
as it should
have been given the optimal setting by its WebSphere MQ administrator.
Answer: B
IBM A2180-376 examen A2180-376 examen certification A2180-376 A2180-376
NO.2 A suite of server applications is to be designed to support the graceful shutdown
capabilities of
WebSphere MQ implemented via the ail ifA suite of server applications is to be designed to
support the
graceful shutdown capabilities of WebSphere MQ implemented via the ?ail if
quiescing?feature. Which of
the following best describes the use of this feature?
A. Applications that have this feature activated can request an extra grace period of a
configurable length
that will allow them to complete critical processing before the queue manager will disconnect
them.
B. Applications using this feature will be informed of the queue manager quiescing via a
completion code
of MQCC_FAILED and a reason code of MQRC_Q_MGR_QUIESCING (or
MQRC_CONNECTION_QUIESCING) and will be disconnected automatically. Applications
are expected
to
periodically attempt reconnection.
C. Using FAIL_IF_QUIESCING options where valid with MQI calls, an application can finalize
MQ
processing, avoiding loss of data, before the queue manager is shut down.
D. When a queue manager is configured with the FAIL_IF_QUIESCING option and is being
shut down, it
will reject all MQI calls with a completion code of MQCC_FAILED and a reason code of
MQRC_Q_MGR_QUIESCING (or MQRC_CONNECTION_QUIESCING) in order to assure
fast and
reliable termination.
Answer: C
certification IBM A2180-376 examen certification A2180-376 certification A2180-376
NO.3 A solution designer is evaluating distribution scenarios and wants to understand the
circumstances
where messages are not delivered as expected. Which of the following are reasons that a
message is
placed on the DLQ?
A. A trigger monitor is unable to start the triggered program
B. The destination queue is full when the program puts the message to the local queue
C. The queue manager is quiescing when the program puts the message to the queue
D. A sending message channel agent is unable to perform data conversion when required for
the
message
E. The program tries to put a message to an invalid local queue
Answer: A D
IBM examen A2180-376 examen A2180-376
NO.4 An application is required to retrieve rows from a relational database table and send
them across
WebSphere MQ to a remote queue manager, where a receiving application consumes them.
After a
successful MQPUT of a message, the corresponding row is to be deleted from the database.
It is intended
to run this application using the free WebSphere MQ Client. The delivery of each message is
to be
guaranteed. Which of the following is true about this implementation?
A. It cannot be done using the free WebSphere MQ Client; the Extended Transactional Client
is required,
since two phase commits are needed for this solution.
B. It cannot be done using the free WebSphere MQ Client; a local queue manager is required
to support
the guaranteed delivery of the messages.
C. This solution can be implemented using the free WebSphere MQ Client, provided that the
receiving
application can recognize and handle repeated delivery of the same message.
D. This solution cannot be implemented using the free WebSphere MQ Client; persistent
messaging is not
supported by the free WebSphere MQ Client.
Answer: C
certification IBM certification A2180-376 A2180-376 examen A2180-376 examen certification A2180-376
NO.5 A new WebSphere MQ application with high volume requirements is being designed
to run on Solaris.
The solution designer is concerned about the performance of the application. The
WebSphere MQ for
Solaris V7 Performance Evaluation Report SupportPac provides all but one of the following
types of
information to the solution designer. Which is NOT discussed in this document?
A. Suggestions for tuning WebSphere MQ
B. Information that can be used to size the company new applicationInformation that can be
used to size
the company? new application
C. Evaluation of the relative cost of one WebSphere MQ API vs. another in different
scenarios
D. Evaluation of the relative cost of persistent messages vs. nonpersistent messages in
different
scenarios
Answer: C
certification IBM certification A2180-376 A2180-376 examen certification A2180-376 A2180-376 examen
NO.6 A solution designer has requested that several queues on a z/OS queue manager be
defined with index
type set to message ID, i.e., INDXTYPE(MSGID). Why would a designer use this setting?
A. It creates a permanent index of MSGIDs that are currently in use for this queue.
B. It allows MQGET commands to have significantly improved performance when getting
messages by
message ID.
C. It ensures that any new MSGIDs are unique as well as making the retrieval of messages
based on
message ID more efficient.
D. The queue manager will keep an index of MSGIDs that have already been used to make
sure that the
message ID is unique when a new message is put.
Answer: B
certification IBM A2180-376 examen A2180-376 examen
NO.7 Which of the following should generally be avoided if an application is being designed
for optimal
efficiency?
A. Make messages nonpersistent if they do not need to be recoverable.
B. Code programs to open and close queues, or connect and disconnect from the queue
manager only
once, if the queues or connection will be used again.
C. Bundle the data to be transmitted into as few messages as possible (e.g., rather than
sending a
hundred 1MB messages, send one 100MB message).
D. Group a batch of messages within a unit of work where appropriate, so that they can be
committed all
at once (e.g., get and put messages under syncpoint and commit them in groups of 10, rather
than
committing them individually).
Answer: C
IBM certification A2180-376 A2180-376 A2180-376 examen
NO.8 A bus company is implementing a solution which will display in real-time the arrival
information of the
next bus on the bus stop sign. Each bus is sending information about its position at regular
intervals. What
is the best way of implementing this solution given that there is limited bandwidth for
communication? The
bus stop sign:
A. subscribes to messages published by the bus
B. queries a central system for bus position using SOAP over HTTP
C. replicates its own database every few minutes with a database stored on a central system
D. sends a message with a request every few minutes to a central system in order to query
bus position.
All replies are compressed.
Answer: A
certification IBM A2180-376 A2180-376 examen A2180-376 examen A2180-376 examen
没有评论:
发表评论